Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Rexroth A10VD43

Uchida/Rexroth · A10V

Drive shaft – Rexroth A10VD43

New, correct codeOn requestA10VD43

Quick answer

The Rexroth-Uchida A10VD43 drive shaft transmits torque from the engine into the cylinder block, rotating the A10VD43 main pump used on mini and small excavators.

Việt Trung Hải, a JIC Hydraulics distributor, has genuine and JIC shafts cut to code for a drop-in fit, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VD43
Condition
New, correct code
Availability
On request

The A10VD43 drive shaft transmits torque from the engine into the cylinder block, turning the pump's rotary group. It carries constant torsional load, so steel grade and spline accuracy set the life of the whole pump.

Which pump it fits

The shaft fits the Rexroth-Uchida A10VD43 main pump — an axial-piston tandem pump common on mini and small excavators. Matching the exact A10VD43 code keeps the splines seated cleanly, with no play or misalignment on assembly.

When to replace

Worn splines, shaft play, knocking or vibration under load signal a failing shaft. Scoring at the journal, oil weeping past the shaft seal, or trouble holding pressure often trace to a worn or misaligned shaft.

Choosing quality parts

Việt Trung Hải, a JIC Hydraulics distributor, has the A10VD43 shaft in genuine and JIC form — properly hardened steel, precise splines, journals to tolerance, so it goes into the original block and housing at the right clearance with no lapping. Fast quote on request.

Frequently asked questions

Which excavator uses the A10VD43 drive shaft?

It fits the Rexroth-Uchida A10VD43 main pump, an axial-piston tandem pump used on mini and small excavators. Việt Trung Hải supplies the exact A10VD43 shaft and quotes quickly for your pump model.

How do I know the drive shaft is worn?

Spline play, knocking and vibration under load, journal scoring, or oil weeping past the shaft seal all point to a worn shaft. Left unchecked, a failing shaft can damage the cylinder block and bearings.

The A10VD43 is a tandem pump — which shaft do I order?

A tandem has a front shaft driven by the engine and a rear shaft that carries drive to the second section; splines and length differ, so say which position you need. Việt Trung Hải, a JIC Hydraulics distributor, stocks the A10VD43 in genuine and JIC form for either position, cut to code, with a fast quote.

Get a quote

Request a quote: Drive shaft – Rexroth A10VD43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides