Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Rexroth A10VD43

Uchida/Rexroth · A10V

Rotary group kit – Rexroth A10VD43

New, correct codeOn requestA10VD43

Quick answer

The A10VD43 rotary group (Rexroth Uchida) is the core rotating assembly inside the A10V/A10VD axial-piston pump — the main pump on small and mini excavators — with the cylinder block, pistons, valve plate and swash plate that create flow and pressure. When the pump weakens, overheats or whines from worn clearances, changing the complete group is the clean fix.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies it to the correct code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VD43
Condition
New, correct code
Availability
On request

What the A10VD43 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. The Rexroth Uchida A10VD43 group is the core of the A10V/A10VD axial-piston pump, the main pump on small and mini excavators. It takes the heaviest wear, so replacing the complete group usually beats piecemeal repair.

When to replace

As clearances open, internal leakage rises: the machine loses power and digs slowly under load, the pump runs hot, and you may hear a whine or growl. A classic sign is decent cold, weak once warm. A scored valve plate or a pitted block confirms it.

Choosing quality parts

Match the A10VD43 code and check material, hardness and the finish of the sliding faces — these keep clearances tight and hold pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A10VD43 rotary group is machined to the interchange tolerances of the code and goes straight into a standard Uchida housing with no fitting work. Genuine units are stocked as well. Contact us for a fast quote.

Frequently asked questions

What is included in the A10VD43 rotary group?

The rotary group covers the main rotating parts of the piston pump: cylinder block, piston set, valve plate, swash plate and related components. This is the assembly that generates flow and pressure, so it takes the most wear.

When should I replace the whole rotary group instead of single parts?

When the valve plate and swash plate are scored, the block is pitted, or piston clearances have opened so the machine runs weak and hot, a complete group restores pressure and flow evenly and lasts longer than piecemeal repairs.

The A10VD43 only loses power once it warms up — is that the rotary group?

Usually yes: worn piston-to-block clearance leaks more internally as the oil thins with heat, so the machine works cold and fades hot. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the A10VD43 group to the correct code, going straight into a standard housing. Contact us to check the pump code and get a quote.

Get a quote

Request a quote: Rotary group kit – Rexroth A10VD43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides