
Swash plate – Uchida/Rexroth A10VD43
Quick answer
The A10VD43 swash plate is the fixed angled plate in the Uchida/Rexroth A10VD43 main pump (A10V family) on mini and small excavators; its tilt sets pump flow.
Việt Trung Hải stocks genuine and JIC parts to the correct code.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Swash plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VD43
- Condition
- New, correct code
- Availability
- On request
What the Uchida/Rexroth A10VD43 swash plate fits
The swash plate is the fixed, angled plate inside the Uchida/Rexroth A10VD43 axial-piston pump. The piston shoes slide across its face as the cylinder block turns; the plate's tilt angle sets how far each piston strokes and therefore the pump's oil flow. The A10VD43 is part of the A10V family — an Uchida-built Rexroth design used as the main pump on mini and small excavators. A correct-code plate holds the original flatness and oil clearance.
When to replace
- A scored, pitted or dished sliding face.
- Weak lifting, slow operation and lost pressure when you open the throttle.
- A noisy, vibrating pump and fast-heating oil.
- Metal debris in the hydraulic oil.
A damaged face wears the piston shoes with it — replace the plate to stop further scoring and protect the cylinder block.
Choosing quality parts
Right material and proper machining let the plate hold its oil film and resist wear. Việt Trung Hải supplies the A10VD43 plate as a genuine part or a JIC part — each on code, dimension-checked before dispatch. As an authorized JIC Hydraulics distributor, VTH takes JIC stock cut to the original fitting sizes, so it seats in a standard Uchida/Rexroth housing. Call VTH for a fast quote.
Frequently asked questions
Which machines use the A10VD43?
The main pump on mini and small excavators, A10V pump family.
When should it be replaced?
When the face is scored, pitted or dished, lifting is weak, pressure drops, the pump is noisy and there is metal debris.
Is it dimension-checked?
Yes. Việt Trung Hải measures the face and the cradle seat before dispatch; genuine or JIC, the part is on code and on fitting size.
Get a quote
Request a quote: Swash plate – Uchida/Rexroth A10VD43
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VDrive shaft – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPin – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VD43A10VD43On requestView · get a quoteTechnical handbook