Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Rexroth-Uchida A10VD43

Uchida/Rexroth · A10V

Ball guide – Rexroth-Uchida A10VD43

New, correct codeOn requestA10VD43

Quick answer

The A10VD43 ball guide holds the piston shoes at the correct angle against the swash plate in the Rexroth-Uchida A10VD piston pump — the main pump on small ~10-ton excavators such as the Sumitomo SH100 and Kobelco SK100.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC parts to code and to interchange tolerance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VD43
Condition
New, correct code
Availability
On request

The A10VD43 ball guide steers and holds the piston-shoe retainer at the correct angle against the swash plate throughout the pump's rotation, keeping the pistons loaded evenly. It belongs to the Rexroth-Uchida A10VD piston-pump series — the main pump on small excavators around the 10-ton class, typically the Sumitomo SH100 and Kobelco SK100.

When to replace: a worn, scored or pitted ball face lets the retainer tilt and the shoes lift off the swash plate. Watch for weak hydraulics, slow boom and arm, power loss under load, knocking or vibration, and metal in the oil. Fit a new ball guide together with the shoes and port plate.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC A10VD43 ball guides cut to the correct code and precisely machined, so they seat in the original pump as they come; genuine units are stocked too. Contact us for a fast quote.

Frequently asked questions

Which excavator does the A10VD43 ball guide fit?

It sits inside the Rexroth-Uchida A10VD main pump used on small excavators around the 10-ton class, typically the Sumitomo SH100 and Kobelco SK100. Send a photo of your pump nameplate and we will confirm the exact fit.

When should the ball guide be replaced?

Replace it when the ball face is worn, scored or pitted, so the shoes lift off the swash plate: weak pump, slow boom and arm, power loss, knocking, or metal in the oil. Replace it together with the shoes and port plate.

Will the JIC A10VD43 ball guide seat on the existing shoe retainer?

It will. The JIC ball face is ground to the A10VD43 interchange tolerance, so the original retainer sits at the right angle with no boring or lapping. Việt Trung Hải is an authorized JIC Hydraulics distributor and also holds genuine parts.

Get a quote

Request a quote: Ball guide – Rexroth-Uchida A10VD43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides