Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Rexroth-Uchida A10VD43

Uchida/Rexroth · A10V

Pin – Rexroth-Uchida A10VD43

New, correct codeOn requestA10VD43

Quick answer

The A10VD43 rotary group is the rotating assembly that generates flow and pressure inside a Rexroth-Uchida A10V/A10VD main pump, used on mini and compact excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies A10VD43 groups in genuine and JIC form, each made to the correct code and fitting the original housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VD43
Condition
New, correct code
Availability
On request

Rexroth-Uchida A10VD43 rotary group — where it fits

The A10VD43 rotary group is the rotating assembly inside a Rexroth-Uchida piston pump — cylinder block, pistons, wear plate, valve plate and drive shaft — the part that actually generates flow and pressure. It fits the A10V/A10VD main pump family used on mini and compact excavators, and it carries the pump's heaviest load and wear.

Signs it needs replacing

The machine loses power, lifts and swings slowly, and feels weak on travel. Oil runs hot, the pump whines, and case drain increases with metal debris in the oil. Once the cylinder block, wear plate and pistons are scored, a full rotary group is the reliable fix.

Choosing quality

A rotary group needs correct alloy steel, heat treatment and precise grinding to seal and hold pressure. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC A10VD43 set made to the same code and fitting tolerance, so block and valve plate seat in the original housing without lapping. Genuine units are stocked too — contact us for a fast quote.

Frequently asked questions

Which excavators does the A10VD43 rotary group fit?

The A10VD43 is the rotary group for the Rexroth-Uchida A10V/A10VD main pump, common on mini and compact excavators. Send us your pump code and machine model and Việt Trung Hải will confirm the correct set and quote.

Should I replace the whole rotary group or just a few parts?

When the block, wear plate, valve plate and pistons are worn together, a full rotary group holds clearances and pressure better than piecemeal repair. If only one part is lightly damaged, we inspect it and advise changing just that part rather than the whole stack.

How do I pick the right A10VD43 code for my pump?

Read the code cast on the pump body with its suffix and serial, then match it to the machine, since the A10V/A10VD family varies in swash plate and shaft. Send Việt Trung Hải a photo of the pump plate; we look it up and ship the exact code, genuine or JIC, either one fitting the original housing directly.

Get a quote

Request a quote: Pin – Rexroth-Uchida A10VD43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides