Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki K5V200DT

Kawasaki · K5V

Ball guide – Kawasaki K5V200DT

New, correct codeOn requestK5V200DT

Quick answer

The Kawasaki K5V200DT ball guide sits in the main pump's rotary group, steering the piston shoes to the correct angle against the swash plate; the K5V200DT pump powers large excavators in the ~35–45 tonne class.

Việt Trung Hải supplies genuine and JIC ball guides to code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · K5V
Model code
K5V200DT
SKU
2021-590-1-203
Condition
New, correct code
Availability
On request

Kawasaki K5V200DT ball guide — which pump it fits

The ball guide sits in the rotary group of the Kawasaki K5V200DT main pump. It steers and holds the piston shoes at the correct angle against the swash plate throughout rotation. K5V200DT is an axial-piston main pump used on large crawler excavators in the ~35–45 tonne class, so the ball guide runs under heavy, continuous load.

Wear signs

A scored or unevenly worn ball guide lets the shoes lift off the swash plate, raising internal leakage. You'll see weak power under load, slow lifting, whining and hot oil; metal particles in the fluid point to a damaged rotary group. Inspect the swash plate, shoes and port plate at the same time.

Choosing the right part

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the K5V200DT ball guide from JIC to code and to fitting tolerance, so the original rotary group loads evenly with no rework. Genuine Kawasaki parts are held as well. Send your pump code for a fast quote.

Frequently asked questions

Which excavators use the K5V200DT ball guide?

The K5V200DT is an axial-piston main pump fitted to large crawler excavators in the ~35–45 tonne class. The ball guide sits in its rotary group. Send your pump code and machine model so we confirm the exact part before quoting.

When should the ball guide be replaced?

Replace it when the ball surface is scored or worn unevenly so the shoes no longer sit flat on the swash plate: weak power under load, slow lifting, whine, hot oil and metal particles in the fluid. Inspect the swash plate and shoes too.

Should the shoes and swash plate be done with the K5V200DT ball guide?

If the swash face is scored or the shoes have play, do them in the same job so the rotary group loads evenly straight after assembly. Việt Trung Hải is an authorized JIC Hydraulics distributor with JIC and genuine K5V200DT parts on hand, quoted fast.

Get a quote

Request a quote: Ball guide – Kawasaki K5V200DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides