Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swash plate – Kawasaki K5V200DT

Kawasaki · K5V

Swash plate – Kawasaki K5V200DT

New, correct codeOn requestK5V200DT

Quick answer

The K5V200DT swash plate is the angled plate in the Kawasaki K5V main pump on ~35–45 tonne excavators; the shoes slide on it and its angle sets piston stroke and pump flow.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swash plate
Brand / pump line
Kawasaki · K5V
Model code
K5V200DT
SKU
2021-590-1-41
Condition
New, correct code
Availability
On request

What the K5V200DT swash plate fits

The swash plate is the fixed, angled plate the piston shoes press and slide against inside the Kawasaki K5V main pump. The K5V200DT swash plate fits excavators of roughly 35–45 tonnes. Its tilt angle sets the piston stroke and so the pump's oil flow; it runs under high pressure and high sliding speed, so the condition of its face drives the efficiency and noise of the whole pump.

Signs it needs replacing

Look for scoring, pitting or uneven wear on the plate face; weak, slow ram movement and fast-heating oil as the clearance grows, dropping pressure and leaking internally; and bronze or metal particles in the oil with a knocking pump. Inspect the piston shoes and bushings at the same time to avoid quick re-wear.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor supplying K5V200DT swash plates from Kawasaki and from JIC — correct code, correct material, machined to the flatness and parallelism a smooth, durable pump needs. The JIC plate holds interchange tolerance, so it beds into the original housing at once, with no reaming or lapping work to pay for. Contact VTH for technical advice and a fast quote.

Frequently asked questions

What size machine uses the K5V200DT swash plate?

Excavators of about 35–45 tonnes running the Kawasaki K5V200DT main pump.

Why does the swash plate need flatness and parallelism?

So the shoes seal at high pressure, keeping flow and pressure steady and the pump quiet.

What else to check when replacing it?

Inspect the piston shoes and bushings so the new swash plate does not wear out quickly again.

Get a quote

Request a quote: Swash plate – Kawasaki K5V200DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides