Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki K5V200DT

Kawasaki · K5V

Cylinder block – Kawasaki K5V200DT

New, correct codeOn requestK5V200DT

Quick answer

The Kawasaki K5V200DT cylinder block is the barrel of piston bores that rotates around the pump shaft, part of the main pump on large ~35–45 tonne excavators such as the Kobelco SK350.

Việt Trung Hải, an authorized JIC distributor, supplies genuine Kawasaki and JIC blocks on the correct code, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · K5V
Model code
K5V200DT
SKU
2021-590-1-248
Condition
New, correct code
Availability
On request

What the K5V200DT cylinder block fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside them to draw and push hydraulic oil. It is the core rotating part of Kawasaki K5V piston pumps. The K5V200DT belongs to the main pump used on large excavators in the ~35–45 tonne class, such as the Kobelco SK350.

Wear signs and choosing quality

A scored, pitted or unevenly worn block face raises internal leakage, so the pump loses pressure and flow: slow boom, slow swing, fast oil heating and metal fines in the return oil. Because the block runs constantly under load, material, heat treatment and machining accuracy are decisive. Việt Trung Hải supplies genuine Kawasaki blocks and JIC Hydraulics blocks — we are an authorized JIC distributor — on the correct K5V200DT code, cut to the tolerances that code carries, so they seal in a standard housing. Fast quotes.

Frequently asked questions

Which excavators use the K5V200DT cylinder block?

The K5V200DT belongs to Kawasaki K5V main pumps fitted to large excavators around 35–45 tonnes, such as the Kobelco SK350. Confirm your pump code and machine model before ordering to match the exact part.

How do I know the cylinder block is worn?

A scored block face or worn piston bores cause pressure and flow loss: slow boom and swing, fast oil heating, and metal fines in the return oil. Inspect the pistons and swash plate at the same time, since they usually wear together.

The pump is still weak after a new K5V200DT block — why?

Usually because the rest of the group was never checked: a worn valve plate, a tired spring pack, loose piston ball feet, or a regulator and relief valve set wrong. A new block only restores the seal at the running face. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct K5V200DT code and helps you check the whole group.

Get a quote

Request a quote: Cylinder block – Kawasaki K5V200DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides