Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki K3V112DT

Kawasaki · K3V

Ball guide – Kawasaki K3V112DT

New, correct codeOn requestK3V112DT

Quick answer

The Kawasaki K3V112DT ball guide steers and holds the piston shoes against the swash plate in the K3V main pump, used on ~20-tonne excavators such as PC200, SK200, ZX200 and DX225.

Việt Trung Hải supplies the correct part in genuine and in JIC, fitting the original pump as it is, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · K3V
Model code
K3V112DT
SKU
2021-590-1-196
Condition
New, correct code
Availability
On request

Kawasaki K3V112DT ball guide — which pump it fits

The ball guide steers and holds the piston shoes at the correct angle against the swash plate throughout the pump's rotation. Code K3V112DT belongs to Kawasaki's K3V main pump family, fitted on ~20-tonne excavators such as Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225.

Wear signs & sourcing

When the ball guide wears or scores, the shoes stop seating flat, oil slips past and the pump runs weak, builds pressure slowly, and struggles under load. Look for unusual whine, rising case-drain flow, or metal in the oil — often alongside worn shoes and valve plate. Việt Trung Hải stocks the K3V112DT ball guide in genuine and in JIC, both cut to the same code and dropping straight into the original retainer and cylinder block; we are an authorized JIC Hydraulics distributor. Contact us for a fast quote.

Frequently asked questions

Which excavators use the K3V112DT ball guide?

The K3V112DT belongs to Kawasaki's K3V main pump, fitted on ~20-tonne excavators like Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225. Check the code stamped on your pump body to confirm the right part.

How do I know the ball guide is worn?

A worn ball guide lets the piston shoes lift off the swash plate, so the pump feels weak, builds pressure slowly and lags under load. Watch for whine, higher case-drain flow and metal in the oil; inspect the shoes and valve plate too.

Does fitting a JIC K3V112DT ball guide need extra machining?

No. The JIC ball guide is made to the K3V112DT code and to the same fitting tolerances, so it goes straight into the original retainer and cylinder block — no honing, no lapping. Việt Trung Hải, an authorized JIC Hydraulics distributor, also carries genuine parts and quotes fast.

Get a quote

Request a quote: Ball guide – Kawasaki K3V112DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides