Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki M2X120

Kawasaki · M2X

Ball guide – Kawasaki M2X120

New, correct codeOn requestM2X120

Quick answer

The Kawasaki M2X120 ball guide & port plate sit in the rotating group of the M2X120 swing motor, holding the piston shoes at the right angle on the swash plate and routing oil in and out. The motor drives the slew on ~20-ton excavators such as the Kobelco SK200 and Hyundai R210.

Việt Trung Hải supplies genuine and JIC parts to code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · M2X
Model code
M2X120
SKU
2021-590-1-206
Condition
New, correct code
Availability
On request

Ball guide & port plate for the Kawasaki M2X120

The ball guide holds the piston shoes at the correct angle against the swash plate through the rotation, while the port plate routes oil in and out through its kidney ports. Both sit in the rotating group of the Kawasaki M2X120 swing motor, which drives the slew on ~20-ton excavators such as the Kobelco SK200 and Hyundai R210/R220.

Wear signs

A worn ball guide or a scored, pitted port plate face raises internal leakage: weak or slow swing, jerky start-up, drift when parked on a slope, overheating, and a whine. Metal in the hydraulic oil points to the same wear.

Choosing quality

Surface hardness and a flat, lapped contact face decide service life. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the M2X120 ball guide & port plate in genuine and in JIC. The JIC set is cut to the code with the kidney ports where they belong, so it runs right in an original swing motor. Send the motor code and we quote fast.

Frequently asked questions

Which excavators use the M2X120 ball guide & port plate?

The M2X120 is a Kawasaki swing motor on ~20-ton excavators, commonly the Kobelco SK200 and Hyundai R210/R220. Send us the machine model and motor number and we will match the correct ball guide and port plate.

How do I know the port plate or ball guide is worn?

Common signs are weak or slow swing, jerky start-up, drift when parked on a slope, an overheating motor, and a whine. Metal particles in the hydraulic oil mean the rotating group, ball guide and port plate are worn and need inspection.

Does the JIC M2X120 set go straight into an original swing motor?

Yes. The JIC ball guide and port plate are made to the M2X120 code and to fitting tolerance, so they go into the original cylinder block with no extra machining. Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks genuine parts too. Send your motor code for a fast quote.

Get a quote

Request a quote: Ball guide – Kawasaki M2X120

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides