Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Rexroth-Uchida A10V40

Uchida/Rexroth · A10V

Retainer plate – Rexroth-Uchida A10V40

New, correct codeOn requestA10V40

Quick answer

The A10V40 port plate holds the piston shoes at the correct angle against the swash plate, working with the ball guide inside the rotating group of the Rexroth-Uchida A10V axial piston pump — the main pump on small and mini excavators.

Việt Trung Hải supplies genuine parts and JIC Hydraulics parts to the same code and fit tolerances, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10V40
Condition
New, correct code
Availability
On request

A10V40 port plate — where it fits

The port plate works with the ball guide to hold the piston shoes flat and at the correct angle against the swash plate throughout each rotation. The A10V40 belongs to the Rexroth-Uchida A10V axial piston family — main pumps typically fitted on small and mini excavators. It runs under constant friction, so flatness and surface hardness set the life of the rotating group.

When to replace

Enlarged shoe holes, loose or lifting shoes, scored contact faces, weak or slow output, knocking under load, and metal particles in the oil all point to a worn plate. Replace the ball guide and plate together.

Choosing quality

Việt Trung Hải supplies genuine parts and the JIC Hydraulics parts we distribute. The JIC A10V40 plate is made to the same code, outside diameter and locating tolerances, so it drops into the original rotating group and fits with no filing or shimming. Contact VTH for the right part code and a fast quote.

Frequently asked questions

Which pump and machine does the A10V40 port plate fit?

It belongs to the rotating group of the Rexroth-Uchida A10V axial piston pump, usually the main pump on small and mini excavators. The ball guide and plate go as a set, so quote your exact pump code and VTH will match the right part.

When should the port plate and ball guide be replaced?

Replace them when the pump loses power, the boom is slow, you hear knocking, or find metal in the oil, and when the shoe holes wear enough to let the shoes lift off the swash plate. Change the set together to keep the shoes seated evenly.

Can the A10V40 plate go straight into a used rotating group?

Yes. Việt Trung Hải distributes JIC Hydraulics parts directly, and the JIC A10V40 plate is made to the same code, diameter and locating holes, so it sits in the original group at the correct clearance. Send your pump code or a photo of the old part and we will check it and quote quickly.

Get a quote

Request a quote: Retainer plate – Rexroth-Uchida A10V40

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides