
Valve plate – Rexroth A10V40
Quick answer
The A10V40 valve plate is the high/low-pressure porting plate for the Rexroth-Uchida A10V40 axial piston pump, a compact pump used on mini excavators and mobile hydraulic equipment.
Việt Trung Hải supplies A10V40 plates in genuine and JIC form, on code and on interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10V40
- Condition
- New, correct code
- Availability
- On request
What the A10V40 valve plate does
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. This part fits the Rexroth-Uchida A10V40 axial piston pump, a compact pump family used on mini excavators and mobile hydraulic equipment. Once the plate wears, the whole pump can no longer hold pressure.
When to replace it
Pull the pump and inspect the sealing face: deep scoring, pitting, cavitation at the high-pressure kidney, a worn bronze layer, or heat bluing all mean the plate is done. On the machine you will see a weak, slow pump, fast-heating oil, and pressure drop under load.
Choosing the right part
A valve plate needs the correct base steel, sintered bronze layer, and precise flat grinding to stay tight and last. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A10V40 plate is made to the correct code and interchange tolerances for the original Rexroth-Uchida pump, so it lines up on the locating pin with nothing to modify. Genuine plates are on the shelf as well. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A10V40 valve plate fit?
The A10V40 valve plate fits the Rexroth-Uchida A10V40 axial piston pump, a compact pump common on mini excavators and mobile hydraulic equipment. Send your pump code or a photo of the old plate and Việt Trung Hải will confirm the exact part before quoting.
How do I know the valve plate is worn out?
Inspect the sealing face: deep scoring, pitting, cavitation at the high-pressure kidney, a worn bronze layer, or heat bluing all mean it is time for a new plate. On the machine, a weak pump, fast-heating oil, and pressure drop under load also point to leakage across the plate.
How is a JIC valve plate different from unbranded parts?
A JIC valve plate uses the correct base steel, sintered bronze layer, and precise flat grinding, so it seals better and lasts longer than unbranded parts. Việt Trung Hải is an authorized JIC Hydraulics distributor supplying correct-spec A10V40 plates.
Get a quote
Request a quote: Valve plate – Rexroth A10V40
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V45A10V45On requestView · get a quoteTechnical handbook