Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Kawasaki NVK45DT

Kawasaki · NV

Shoe plate – Kawasaki NVK45DT

New, correct codeOn requestNVK45DT

Quick answer

The NVK45DT shoe plate holds the piston shoes flat against the swash plate in a small Kawasaki NV piston pump, keeping them seated and sealing. A worn or loose plate causes internal leakage and low flow.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Kawasaki · NV
Model code
NVK45DT
SKU
2021-590-1-69
Condition
New, correct code
Availability
On request

What the NVK45DT shoe plate does

The shoe plate holds the piston shoes flat and even against the swash plate as the cylinder block turns, stopping them lifting on the intake stroke where no oil pressure holds them down. With the shoes seated, the pump draws and delivers cleanly and seals. It belongs to Kawasaki's small NV-series axial piston pump; NVK45DT fits the matching assembly, so check the code on the pump body before fitting.

Signs it needs replacing

A worn, scored or cracked face, or slack shoe pockets, lets the shoes lift: internal leakage rises, the pump goes weak and slow to build pressure, flow turns unstable and the machine struggles under load. A hot pump and metal particles in the oil point the same way.

Choosing the right part

The plate must be flat, hard and correct in its shoe pockets so every shoe stays seated; a small error lets one lift and takes the piston set and swash plate with it. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies NVK45DT shoe plates made by JIC to the code, in the right material and surface hardness, so the pump builds its proper pressure again. Contact us for a fast quote.

Frequently asked questions

How does the shoe plate differ from the swash plate?

The swash plate sets piston stroke; the shoe plate only holds the shoes against it and does not set displacement.

Signs the NVK45DT shoe plate is failing?

Weak pump, slow pressure, unstable flow, heat and metal in the oil as the shoes lift off the swash plate.

Will the pump build full pressure again after a new NVK45DT plate?

If the block and shoes are still sound, yes: the JIC plate is to code and to hardness, so the shoes seal again and pressure returns.

Get a quote

Request a quote: Shoe plate – Kawasaki NVK45DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides