
Kawasaki · NV
Cylinder block – Kawasaki NVK45DT
Quick answer
The Kawasaki NVK45DT cylinder block holds the rotating piston bores that set the pump's pressure and flow; it is part of Kawasaki's NV-series piston pumps used on compact excavators and hydraulic equipment.
Việt Trung Hải supplies JIC and genuine blocks to the correct code that hold clearance in the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · NV
- Model code
- NVK45DT
- SKU
- 2021-590-1-266
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki NVK45DT cylinder block does
The cylinder block holds the piston bores that rotate around the drive shaft; the pistons reciprocate inside them to draw and push oil, setting the pump's pressure and flow. The NVK45DT belongs to Kawasaki's NV-series axial piston pumps, common on compact excavators and industrial hydraulic equipment. It is the highest-loaded, highest-friction part in the pump, so bore accuracy and the valve-plate face matter most.
Signs it needs replacing
A worn block leaves the pump weak and the machine slow, most noticeable once the oil is hot. Watch for unusual noise, rising oil temperature from internal leakage, or metal particles in the oil. Scoring, pitting or burn discoloration on the valve-plate face means replace it before the damage spreads to the pistons and plate.
Genuine-quality parts, fast quote
On a small pump, a bore clearance that is off by a hair shows up as lost pressure. The JIC NVK45DT block is cut to the original code and fitting tolerance, hardened, with a flat back face, so the clearance lands where it belongs and pressure holds once the block is in the original housing. Việt Trung Hải distributes JIC Hydraulics under authorization and carries genuine blocks; contact VTH to check the code and get a fast quote.
Frequently asked questions
Which pump does the NVK45DT cylinder block fit?
The NVK45DT is a cylinder block for Kawasaki's NV-series axial piston pumps, common on compact excavators and industrial hydraulic equipment. Send your pump code and machine model so VTH can confirm the exact part before quoting.
How do I know the cylinder block is worn?
The pump fades and the machine slows once the oil is hot, usually with unusual noise and rising oil temperature from internal leakage. Open it up and scoring, pitting or burn marks on the back face, bell-mouthed bores, or metal particles in the oil mean the block has to go.
Does the JIC NVK45DT block need adjusting to fit an existing pump?
No. VTH is an authorized JIC Hydraulics distributor; the JIC NVK45DT block is machined to the same code and fitting tolerance, so it sits at the correct working clearance in the original housing. Genuine blocks are stocked too, with a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki NVK45DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVDrive shaft – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVShoe plate – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVPiston – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NVK45DTNVK45DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV137NV137On requestView · get a quoteTechnical handbook