Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Komatsu HPV160 (rear)

Komatsu · HPV

Shoe plate – Komatsu HPV160 (rear)

New, correct codeOn requestHPV160

Quick answer

The HPV160 rear shoe plate holds the piston shoes flat against the swash plate in the rear section of the Komatsu HPV160 main pump (PC400-class, ~40 t), keeping them seated and evenly loaded.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Komatsu · HPV
Model code
HPV160
Condition
New, correct code
Availability
On request

Where the HPV160 rear shoe plate sits

The Komatsu HPV160 main pump is a tandem unit, and the rear shoe plate is the retainer for its rear pump section. It presses the piston shoes flat against the swash plate as the cylinder block rotates, keeping the shoes seated and evenly loaded through each stroke. HPV160 is the axial-piston pump on ~40-tonne Komatsu PC400-class excavators. This is the shoe retainer, not the swash plate.

Signs of trouble

A worn or cracked rear plate, or one that lets the shoes lift, breaks the oil-film seal and raises internal leakage. The machine feels weak, loses power under heavy load, flow drifts, oil runs hot and the pump grows noisy. Lifting shoes eventually score both the shoes and the swash plate face.

Choosing the right part

Order the correct HPV160 rear code; the plate must be flat, hard and press evenly to hold the shoes. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC plate is machined to the interchange tolerances and goes straight into the original pump housing, with no reaming or fitting work. Genuine Komatsu plates are on the shelf as well. Send your pump code for a fast quote.

Frequently asked questions

What is the difference between the rear and front HPV160 shoe plate?

HPV160 is a tandem pump; the rear plate holds the shoes of the rear section, the front plate serves the front section. Same job, different location.

Does the HPV160 shoe plate set displacement?

No. It only holds the shoes against the swash plate; the swash plate sets displacement.

Does fitting a JIC shoe plate to the HPV160 need extra machining?

No. The JIC part is made to the rear code and to interchange tolerances — old plate out, new plate in, run it.

Get a quote

Request a quote: Shoe plate – Komatsu HPV160 (rear)

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides