Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Komatsu HPV160

Komatsu · HPV

Piston – Komatsu HPV160

New, correct codeOn requestHPV160

Quick answer

The HPV160 piston is the reciprocating element in the rotary group of the Komatsu HPV160 main pump, fitted on ~40-tonne excavators such as the Komatsu PC400.

Việt Trung Hải supplies genuine Komatsu and JIC parts to the HPV160 code, cut to the clearance the standard block needs, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Komatsu · HPV
Model code
HPV160
Condition
New, correct code
Availability
On request

What the HPV160 piston fits

The piston — the reciprocating element in an axial-piston pump's rotary group — slides in the cylinder-block bore and rides against the swash plate, turning engine rotation into hydraulic flow and pressure. The Komatsu HPV160 is the main pump on ~40-tonne excavators such as the Komatsu PC400, so its pistons run under heavy, continuous load.

When to replace

Scored or pitted piston surfaces, worn or loose piston shoes, rising clearance and internal leakage, weak pressure, sluggish lift or swing, and metal particles in the oil all point to worn pistons — usually alongside a worn block and swash plate.

Genuine-quality parts

Việt Trung Hải supplies Komatsu HPV160 pistons, genuine and JIC Hydraulics alike — correct material, machining and surface hardness, sized to the running clearance of the standard block. Contact us for a fast quote.

Frequently asked questions

Which excavator does the HPV160 piston fit?

The HPV160 is the main pump on roughly 40-tonne excavators, typically the Komatsu PC400. The piston is an internal part of that pump's rotary group, carrying heavy load during continuous operation.

When should the HPV160 piston be replaced?

Replace when the piston surface is scored or pitted, the shoe is worn or loose, the pump loses pressure or flow, the machine turns sluggish, or metal appears in the oil. Worn pistons usually come with a worn block and swash plate.

Should I change one worn HPV160 piston or the whole set?

Change the set. Wear is never even, so mixing an old piston in with new ones skews the load and the fresh parts go off quickly. Việt Trung Hải holds genuine Komatsu and JIC HPV160 pistons in full sets to the correct code, with a fast quote.

Get a quote

Request a quote: Piston – Komatsu HPV160

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides