Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swash plate – Komatsu HPV160

Komatsu · HPV

Swash plate – Komatsu HPV160

New, correct codeOn requestHPV160

Quick answer

The HPV160 swash plate is the fixed angled plate in the axial-piston main pump; the piston shoes slide on it and its tilt sets flow. The pump is used on ~40-ton excavators like the PC400.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swash plate
Brand / pump line
Komatsu · HPV
Model code
HPV160
Condition
New, correct code
Availability
On request

Which pump the Komatsu HPV160 swash plate fits

The HPV160 swash plate is the fixed, angled plate inside the pump that the rotating piston shoes slide across. Its tilt sets the piston stroke and so the pump's flow; when the face wears or scores, the oil film between shoes and plate breaks down, causing pressure loss and reduced flow. It sits in the Komatsu HPV160 main pump — an axial-piston unit on roughly 40-ton excavators such as the Komatsu PC400.

Signs it needs replacing

  • Weak or slow lift and swing.
  • Unusual pump noise, vibration, faster oil heating.
  • A scored, pitted or dished face where the shoes no longer seal.
  • Copper traces in the drained oil. With these signs, inspect the swash plate and piston shoes together and replace as a set.

Choosing the right part

A correct HPV160 plate needs wear-resistant material and true flatness to hold a steady oil film. Việt Trung Hải sits inside the authorized distribution network of JIC Hydraulics; JIC controls this code from material and heat treatment through to flatness, and the plate fits a standard Komatsu housing with no extra machining. Genuine Komatsu parts are held at VTH too. Contact VTH for advice and a fast quote.

Frequently asked questions

What does HPV160 fit?

The Komatsu HPV160 main pump on roughly 40-ton excavators such as the PC400.

What to replace with the plate?

Inspect and replace the swash plate together with the piston shoes to avoid quick re-wear.

Is a hot pump with falling pressure always the plate?

Not always. Shoes, block and valve plate all bleed pressure; open the pump and measure the plate face before deciding. VTH has genuine and JIC parts to the HPV160 code.

Get a quote

Request a quote: Swash plate – Komatsu HPV160

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides