Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft – Komatsu HPV160

Komatsu · HPV

Front drive shaft – Komatsu HPV160

New, correct codeOn requestHPV160

Quick answer

The Komatsu HPV160 front drive shaft is the pump's input shaft — it takes engine torque to turn the rotary group and carries drive through to the rear pump section. The HPV160 main pump powers ~40-tonne excavators such as the Komatsu PC400.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks HPV160 front shafts genuine and JIC, to the right code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Komatsu · HPV
Model code
HPV160
Condition
New, correct code
Availability
On request

The Komatsu HPV160 front drive shaft is the pump's input shaft: it takes torque from the engine into the cylinder block to turn the rotary group. On the HPV tandem pump it also carries drive through to the rear section.

Fitment. The HPV160 main pump powers roughly 40-tonne excavators, typically the Komatsu PC400. The front shaft differs from the rear by position and drive direction — it sits at the input and splines to the engine drive, while the rear shaft couples to the second pump. Matching front vs rear and the correct spline tooth count is the key selection criterion.

Wear signs. Worn, chipped or stripped splines cause vibration, noise and loss of drive; a bent shaft or worn journals run rough; a scored seal surface leaks oil.

Việt Trung Hải supplies HPV160 front shafts genuine and JIC Hydraulics; we distribute for JIC, and its shaft carries the same code and spline sizes at both ends, so drive passes through to the rear section as before. Contact VTH for the right code and a fast quote.

Frequently asked questions

Which excavator does the HPV160 front shaft fit?

The front shaft sits in the Komatsu HPV160 main pump used on roughly 40-tonne excavators, typically the Komatsu PC400. It takes drive from the engine and passes it through to the rear pump section of the HPV tandem pump.

How do front and rear pump shafts differ?

The front shaft is at the input, splined to the engine and taking the main drive; the rear shaft couples to the second pump in a tandem unit. When ordering, specify front or rear and the exact spline tooth count.

Does Việt Trung Hải stock the HPV160 shaft?

Việt Trung Hải keeps HPV160 front drive shafts in stock, genuine and JIC Hydraulics — we are an authorized JIC distributor and the JIC shaft fits the original pump as it comes. Send the pump code and front/rear detail and VTH will check availability and send a fast quote.

Get a quote

Request a quote: Front drive shaft – Komatsu HPV160

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides