Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft – Komatsu HPV160

Komatsu · HPV

Rear drive shaft – Komatsu HPV160

New, correct codeOn requestHPV160

Quick answer

The Komatsu HPV160 rear drive shaft is the back shaft of the tandem pump, splining in to turn the second pump group; HPV160 is the main pump on ~40-ton excavators such as the Komatsu PC400.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC parts on the same code, fitting the original pump, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Komatsu · HPV
Model code
HPV160
Condition
New, correct code
Availability
On request

The rear drive shaft sits at the back of the Komatsu HPV160 tandem pump and carries torque across to the second pump group. Unlike the front shaft, which takes drive straight from the engine, the rear shaft only meshes with and turns the remaining pump unit — that position is the key difference when selecting the right part.

Which pump and machine

HPV160 is the main pump on roughly 40-ton excavators, typically the Komatsu PC400. The rear shaft splines into the second cylinder block and the front shaft so both groups turn together. Correct front/rear placement is essential for full pump output.

When to replace

Worn, loose or chipped splines are the clearest sign — weak power, pump noise, vibration under load. A bent shaft, worn journals or pitted mating faces also mean fitting a new shaft before the cylinder block takes the damage.

Choosing quality

Việt Trung Hải supplies the HPV160 rear shaft as genuine Komatsu parts and as JIC parts, both on the same code. As an authorized JIC Hydraulics distributor we ship hardened steel with splines cut to tolerance, so the second pump group is driven evenly from the first turn. Contact us for a fast quote.

Frequently asked questions

How is the HPV160 rear shaft different from the front shaft?

The front shaft takes drive directly from the engine, while the rear shaft sits behind it in the tandem pump and meshes to turn the second pump group. They differ in position and spline ends and are not interchangeable.

Which excavator uses the HPV160 rear shaft?

HPV160 is the main pump on roughly 40-ton excavators, typically the Komatsu PC400. The rear shaft belongs to the HPV160 tandem pump on that class. Send us your pump code or machine model and we will confirm the right part.

Does a JIC HPV160 shaft need any rework to fit the pump?

No. The JIC shaft is machined to the HPV160 code with splines and journals on tolerance, so it meshes with the original tandem pump and drives the rear group evenly. Việt Trung Hải also stocks genuine Komatsu shafts — contact us for a fast quote and stock check.

Get a quote

Request a quote: Rear drive shaft – Komatsu HPV160

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides