Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Kawasaki DNB50

Kawasaki · DNB

Piston – Kawasaki DNB50

New, correct codeOn requestDNB50

Quick answer

The Kawasaki DNB50 piston is the reciprocating plunger in a DNB-series axial piston pump that draws in and pressurizes hydraulic oil to build flow and pressure. It is a wear part to change by the DNB50 code when the pump weakens, oil overheats or internal leakage rises.

Việt Trung Hải supplies correct-code JIC pistons and genuine Kawasaki parts with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Kawasaki · DNB
Model code
DNB50
SKU
2021-590-1-165
Condition
New, correct code
Availability
On request

What the Kawasaki DNB50 piston does

The piston — the reciprocating plunger inside an axial piston pump's cylinder block — is driven by the swash plate to draw in and pressurize hydraulic oil, generating the pump's flow and pressure. The DNB50 piston set belongs to Kawasaki's DNB pump family and fits the matching DNB50 pump group; it wears as a matched pair with the block and valve plate.

Signs of wear

Scored piston bodies, worn or loose piston shoes, sluggish response under load, internal leakage, overheating oil and metal particles in the oil all point to worn pistons. A piston seizing in its bore can damage the whole rotary group, so replace early and as a full set.

Choosing quality

Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC cuts the DNB50 piston to its own code — hardened steel, correct clearance to the block, fine surface finish — so it goes into an original pump as it is. Genuine Kawasaki pistons are stocked too. Contact us for a fast quote.

Frequently asked questions

Which pump does the Kawasaki DNB50 piston fit?

The DNB50 piston is the plunger set for Kawasaki's DNB-series axial piston pump group, matched to the DNB50 code. Confirm your exact pump version and machine model before ordering; Việt Trung Hải helps you cross-check and quotes fast.

When should pump pistons be replaced?

When the machine responds slowly, loses power under load, oil overheats or metal particles appear in the oil. Scored piston bodies and worn shoes are clear signs; replace as a full set to avoid damaging the cylinder block.

Should I change one piston or the whole DNB50 set?

Change the set. Pistons in one block wear together, and mixing a new piston with worn ones spreads the load unevenly, so the rotating group runs rough and fails again. Việt Trung Hải supplies the full correct-code DNB50 set from JIC or genuine Kawasaki parts, plus advice on checking the block and valve plate.

Get a quote

Request a quote: Piston – Kawasaki DNB50

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides