
Drive shaft – Kawasaki DNB08
Quick answer
The Kawasaki DNB08 drive shaft transmits engine torque into the cylinder block to spin the rotary group of a Kawasaki main piston pump.
Việt Trung Hải supplies genuine and JIC shafts on the correct code, splines meshing with the original block, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB08
- SKU
- 2021-590-1-2
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki DNB08 drive shaft does
The drive shaft transmits torque from the engine into the cylinder block to rotate the pump's rotary group. Coded DNB08, it belongs to Kawasaki's DNB drive-shaft line and fits Kawasaki main piston pumps. It runs under constant torsional load and meshes by splines with the cylinder block and drive bushing, so concentricity and spline profile must be accurate for smooth, backlash-free running.
When to replace it
Knocking or vibration under throttle, axial play, pressure loss, or a chipped and twisted spline end all point to a worn shaft. Replace it before the wear spreads to the cylinder block and bushings.
Choosing genuine-quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the Kawasaki DNB08 shaft in genuine and JIC: properly hardened steel, spline profiles machined to code, meshing with the original cylinder block and drive bushing straight away. Contact VTH for a fast quote.
Frequently asked questions
Which pump does the Kawasaki DNB08 drive shaft fit?
DNB08 is a Kawasaki DNB-series drive shaft for Kawasaki main piston pumps. Send us the pump model and the spline tooth count of your old shaft so we can match the exact code before quoting.
How do I know the drive shaft is worn?
Knocking or vibration under throttle, axial play, or weak pressure usually means worn or chipped splines or a bent shaft. Replace it early to avoid damaging the cylinder block and drive bushings.
Will a JIC DNB08 shaft mesh with my existing block?
It will. The JIC shaft is machined to the DNB08 code, with the spline profile and journal diameters on tolerance, so it meshes with the original cylinder block and drive bushing. VTH also stocks genuine shafts, with a fast quote.
Get a quote
Request a quote: Drive shaft – Kawasaki DNB08
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBPin – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBPiston – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBBall guide – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quoteTechnical handbook