
Valve plate – Kawasaki K3V140DT
Quick answer
The Kawasaki K3V140DT valve plate is the high/low-pressure porting plate inside the K3V main pump, used on 30-ton excavators like the Komatsu PC300 and Hitachi ZX330. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC plates to the correct code and spec, so they seal in the original pump and keep the working clearance. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · K3V
- Model code
- K3V140DT
- SKU
- 2021-590-1-134
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki K3V140DT valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the pump. The K3V140DT belongs to Kawasaki's K3V main-pump family, fitted on 30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. Its flatness and surface finish set how well the pump holds pressure.
Signs of wear
Scoring, pitting or uneven wear lets high-pressure oil leak to the low-pressure side and the pump stops holding pressure. You will notice weak digging power, slow boom and arm, dropping flow, unusually hot oil and sometimes metal particles in the fluid.
Choosing quality
Việt Trung Hải is an authorized JIC Hydraulics distributor supplying JIC valve plates matched to the K3V140DT code. Material and surface machining are held to that spec, so the plate seals in the original pump, keeps the working clearance and needs no adjustment. Call us for a fast quote.
Frequently asked questions
Which excavators use the K3V140DT valve plate?
The K3V140DT is part of the Kawasaki K3V main pump, fitted on 30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. Check the actual pump code on your machine to confirm the correct part before ordering.
How do I know the valve plate needs replacing?
A worn or scored valve plate makes the pump lose pressure, the machine feels weak, movements slow down and the oil runs unusually hot. Metal particles in the fluid or pitting on the surface mean you should replace it and inspect the cylinder block too.
Does a JIC K3V140DT plate need any adjustment to fit?
None. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC plate carries the K3V140DT code and spec, so it seats in the original pump sealed, with nothing to lap or trim. Contact us for technical advice and a fast quote based on your pump code.
Get a quote
Request a quote: Valve plate – Kawasaki K3V140DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRotary group kit – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VSwash plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VShoe plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VRetainer plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VSpring – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VPiston – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VBall guide – Kawasaki K3V140DTK3V140DTOn requestView · get a quoteTechnical handbook