Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Spring – Kawasaki K3V140DT

Kawasaki · K3V

Spring – Kawasaki K3V140DT

New, correct codeOn requestK3V140DT

Quick answer

The Kawasaki K3V140DT spring sits in the K3V main pump rotary group, seating the cylinder block against the valve plate and holding the pistons on the swash plate so the pump stays sealed and self-primes. It fits the K3V140 pump on ~30-ton excavators like the Komatsu PC300 and Hitachi ZX330. Việt Trung Hải supplies JIC springs to the correct code, at the original free length and load, so they seat in the standard rotary group. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V140DT
SKU
2021-590-1-123
Condition
New, correct code
Availability
On request

The spring in the Kawasaki K3V140DT rotary group keeps the pump sealed at startup. It seats the cylinder block against the valve plate and holds the piston shoes onto the swash plate, so the pump self-primes before oil pressure takes over.

Which pump it fits

This spring belongs to the K3V140 main pump rotary group from Kawasaki — the piston pump used on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

When to replace

A weak or broken spring lets the block lift off the valve plate, causing internal leakage: slow pressure build on a cold start, weak power under load, sometimes vibration or knocking. Replace it alongside the valve plate and wear plate at overhaul.

Choosing quality parts

Free length and load must match the design, or the block and valve plate wear early. Việt Trung Hải, a JIC Hydraulics distributor, supplies JIC K3V140DT springs in heat-treated spring steel, wound to the original length and load so they seat in the standard rotary group without shims. Contact us for a fast quote.

Frequently asked questions

Which excavator does the K3V140DT spring fit?

It is a spring inside the Kawasaki K3V main pump rotary group, K3V140 size, used on roughly 30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. Send us your pump code or machine model and we will confirm the exact part.

How do I know the rotary-group spring is weak or broken?

Common signs are slow pressure build on a cold start, weak power under load, and sometimes vibration or knocking as the block leaks internally. Inspect and replace the spring together with the valve plate and wear plate at overhaul.

Change just the spring, or the whole K3V140DT rotary group?

If the block and valve plate still seal and only the preload is gone, the spring alone is enough. Once the running face is scored or the block is loose, do the set. Việt Trung Hải distributes JIC Hydraulics and carries K3V140DT springs and complete rotary groups to code, fitting the original housing directly. Contact us for advice and a fast quote.

Get a quote

Request a quote: Spring – Kawasaki K3V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides