Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston pump – Kawasaki K3V140DT

Kawasaki · K3V

Piston pump – Kawasaki K3V140DT

New, correct codeOn requestK3V140DT

Quick answer

The Kawasaki K3V140DT is the main axial piston pump that supplies high-pressure oil across ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the pump and rotary-group parts in genuine and JIC form, each to the correct code and fitting tolerance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston pump
Brand / pump line
Kawasaki · K3V
Model code
K3V140DT
Condition
New, correct code
Availability
On request

Kawasaki K3V140DT main pump — machine fit

The K3V140DT is a Kawasaki variable-displacement axial piston pump — the main pump that turns engine power into the high-pressure oil flow driving boom, arm, bucket, swing and travel. It's a tandem assembly with regulator, fitted to ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

When the main pump needs attention

As the cylinder block, valve plate or piston shoes wear, the machine loses power under load, movements slow and hesitate, oil heats quickly, and the pump whines or knocks — sometimes with metal debris in the oil.

Choosing a quality pump

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the K3V140DT pump and rotary-group parts in genuine and JIC form — right material, precise machining, tolerances true to the code, so a group beds into the standard housing with no honing or lapping. Fast quotes by model and machine.

Frequently asked questions

Which excavators use the K3V140DT pump?

The K3V140DT is a Kawasaki main pump for ~30-ton excavators, typically the Komatsu PC300 and Hitachi ZX330. Before ordering, match the pump code and machine generation so the regulator and shaft configuration are correct.

Should I change the whole pump or just the rotary group?

It depends on condition. If only the cylinder block, piston shoes or valve plate are worn, a rotary group is enough and keeps the original housing. If the housing or shaft is badly damaged, fit a complete pump. We advise based on your case.

What information do you need to pin down the right K3V140DT?

Send the number stamped on the pump body, the machine generation, and photos of the regulator and shaft end. The K3V140DT family varies in shaft, flange and regulator layout. With that in hand, Việt Trung Hải confirms the exact pump or JIC rotary group and quotes fast.

Get a quote

Request a quote: Piston pump – Kawasaki K3V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides