
Valve plate – Kawasaki K5V160DT
Quick answer
The Kawasaki K5V160DT valve plate is the high/low-pressure porting plate in the main pump that times each piston's intake and discharge, fitted to the K5V160DT pump on roughly 30-ton excavators.
Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies JIC plates to code alongside genuine Kawasaki ones, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · K5V
- Model code
- K5V160DT
- SKU
- 2021-590-1-139
- Condition
- New, correct code
- Availability
- On request
Kawasaki K5V160DT valve plate — which pump it fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Kawasaki K5V160DT main pump — a piston pump used on roughly 30-ton excavators — it carries the full pressure difference between the suction and discharge ports, so its face must stay dead flat and smooth.
When to replace
Scoring, pitting or crescent-shaped wear marks on the face; weak pump output and pressure drop; slow boom lift and swing under heavy load; faster oil heating and rising internal leakage. As the plate wears, clearance grows and oil bleeds across the gap, cutting flow and efficiency.
Choosing quality parts
A correct-code K5V160DT valve plate needs proper material and surface flatness so it does not wear out again quickly. Việt Trung Hải is an authorized JIC Hydraulics distributor: a JIC plate is JIC's own part, cut to the right porting profile and fit tolerance, so it seats straight onto the standard cylinder block with no extra lapping. Genuine Kawasaki plates stay on the shelf too. Contact us for the right code and a fast quote.
Frequently asked questions
Which excavator does the K5V160DT valve plate fit?
The K5V160DT is a Kawasaki main pump used on roughly 30-ton excavators. The correct-code K5V160DT valve plate fits this pump assembly. Việt Trung Hải cross-checks by pump number and machine model to confirm the right part.
How do I know the valve plate needs replacing?
Common signs: weak pump, pressure drop, slow boom lift and swing under heavy load, faster oil heating and more internal leakage. On teardown, a scored, pitted or worn face means the valve plate should be replaced.
Does a JIC valve plate need lapping before it goes on the original block?
No. The JIC K5V160DT is machined to the correct code and fit tolerance, so the locating pin and the ports line up in the standard pump housing. All you do is check the block face and piston heads before assembly. Việt Trung Hải is an authorized JIC distributor and also carries genuine Kawasaki plates.
Get a quote
Request a quote: Valve plate – Kawasaki K5V160DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K5VRotary group kit – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VSwash plate – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VShoe plate – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VRetainer plate – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VPiston – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VBall guide – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VCylinder block – Kawasaki K5V160DTK5V160DTOn requestView · get a quote
Kawasaki · K5VRotary group kit – Kawasaki K5V140DTK5V140DTOn requestView · get a quoteTechnical handbook