Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki K5V160DT

Kawasaki · K5V

Cylinder block – Kawasaki K5V160DT

New, correct codeOn requestK5V160DT

Quick answer

The Kawasaki K5V160DT cylinder block is the barrel holding the rotating piston bores in the K5V-series main pump used on roughly 30-ton excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC and genuine blocks on the correct code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · K5V
Model code
K5V160DT
SKU
2021-590-1-247
Condition
New, correct code
Availability
On request

What the K5V160DT cylinder block does

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside to draw and deliver oil, feeding the whole system. It is the most heavily loaded, wear-prone part in the pump.

The Kawasaki K5V160DT block fits the K5V-series main piston pump used on roughly 30-ton crawler excavators. The K5V160DT code must match so the bore count, bore diameter and valve-plate face suit the exact pump variant.

Signs it needs replacing

Weak pump and pressure loss under load, a scored or pitted valve-plate face, widened piston bores causing internal leakage and rapid oil heating, plus metal debris in the hydraulic oil.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the K5V160DT block in JIC and genuine form, with material, bore machining and durability set by the code itself. The JIC block lands on the right clearance, so block, pistons and valve plate turn in step instead of loading one side. Contact us for the right pump variant and a fast quote.

Frequently asked questions

Which excavator uses the Kawasaki K5V160DT block?

The K5V160DT is the cylinder block for the K5V-series main piston pump, typically fitted to around 30-ton crawler excavators. Send your machine and pump details so Việt Trung Hải can confirm the exact code before ordering.

When should the cylinder block be replaced?

Check the block when the pump loses pressure, the machine slows under load, the valve-plate face is scored, or metal debris appears in the oil. A worn block usually damages the pistons and valve plate too, so replace them together.

How many K5V160DT block versions are there?

Several, differing in bore count, bore diameter and valve-plate face, so the code cast on the pump housing decides it — the name K5V160DT on its own is not enough. Việt Trung Hải, an authorized JIC Hydraulics distributor, matches the variant before shipping and quotes fast.

Get a quote

Request a quote: Cylinder block – Kawasaki K5V160DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides