Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki KVC925

Kawasaki · KVC

Valve plate – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The Kawasaki KVC925 valve plate is the high/low-pressure porting plate pressed against the cylinder block, timing each piston's intake and discharge in Kawasaki's KVC main pump (mid- to large-size crawler excavators, including many Sumitomo machines).

Việt Trung Hải supplies the correct KVC925 valve plate with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-143
Condition
New, correct code
Availability
On request

Kawasaki KVC925 valve plate — which pump it fits

The KVC925 valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. It belongs to Kawasaki's KVC main-pump family — piston pumps found on mid- to large-size crawler excavators, including many Sumitomo machines. The face works under high pressure in constant contact with the block, so it must stay flat and hard to keep the oil ports sealed.

Signs it needs replacing

A worn or scored valve plate opens the clearance to the block, causing internal leakage and lost flow. The machine goes weak, boom and swing slow down, and oil runs hot. On teardown you often see scoring, pitting, or heat discoloration at the ports; deep scoring means replace rather than regrind.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC builds the KVC925 plate to its own code — selected material, precision-ground flat face, hardened surface for wear resistance and a lasting seal — and to size, so it drops onto the standard Kawasaki block without adjustment. Genuine plates are in our catalogue too, with a fast quote.

Frequently asked questions

Which machine does the KVC925 valve plate fit?

The KVC925 valve plate belongs to Kawasaki's KVC main pump, common on mid- to large-size crawler excavators including many Sumitomo machines. Send your machine and pump numbers so we confirm the exact part and quote you.

How do I know the valve plate is worn?

Common signs are a weak pump, slow boom and swing, and oil heating up from internal leakage. On teardown you often see scoring, pitting, or discoloration at the ports; deep scoring means replace rather than regrind.

Does the KVC925 plate only go in one way round?

Yes. The locating hole and the pair of kidney ports follow the direction of rotation — fit it the wrong way and the pump makes no pressure. The JIC KVC925 keeps the locating hole where the original code puts it, so there is only one way in. Việt Trung Hải is an authorized JIC distributor and stocks genuine plates as well.

Get a quote

Request a quote: Valve plate – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides