Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group – Kawasaki KVC925

Kawasaki · KVC

Rotary group – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The KVC925 bushing is a plain bearing in the rotary group of a Kawasaki piston pump, supporting and centering the rotating parts to keep the pump running smoothly at the correct clearance. It fits Kawasaki's KVC-series main pump on medium-to-large excavators.

Việt Trung Hải supplies JIC KVC925 bushings machined to the original size for a direct press into the standard bore, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-1
Condition
New, correct code
Availability
On request

The KVC925 bushing is a plain bearing inside the pump's rotary group — the rotating assembly of a Kawasaki piston pump. It supports and centers the rotating parts (drive shaft, cylinder block), holds running clearance, carries radial load and cuts friction.

What the KVC925 bushing fits

It belongs to Kawasaki's KVC-series main pump, used on medium-to-large crawler excavators. Supplied to the correct KVC925 code and size, it seats properly against the shaft and block — a wear item to renew during a rotary-kit or pump overhaul.

Signs of wear

Noise and vibration, shaft runout and growing play, a scored or flaked bearing surface, metal debris in the oil, weak pump and slow response.

Choosing quality parts

A poor bushing wears fast and can ruin the costly shaft and block. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC bushings to code KVC925 — correct alloy, machined to the original size, pressed into the standard bore with the shaft clearance already right. No line reaming. Fast quotes available.

Frequently asked questions

Which pump and excavator does the KVC925 bushing fit?

The KVC925 bushing is a rotary-group part for Kawasaki's KVC-series main pump, fitted on medium-to-large crawler excavators. Send your pump code and machine model and Việt Trung Hải will confirm the exact part before quoting.

When should the pump bushing be replaced?

Replace it when the pump grows noisy, the shaft runs out or play increases, the bearing surface is scored, or you find metal debris in the oil and weak flow. It is usually renewed together with the rotary kit during an overhaul.

Does a new KVC925 bushing need the bore reamed after pressing?

Not when the bushing is to code and to size. JIC bushings use the correct alloy and are machined to the original dimensions, so the shaft clearance is right once pressed into the standard bore. Loose-market parts come in off-size and then need reaming, and they wear fast enough to damage costly components. Việt Trung Hải distributes JIC Hydraulics parts to code KVC925.

Get a quote

Request a quote: Rotary group – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides