Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Kawasaki KVC925

Kawasaki · KVC

Drive shaft – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The Kawasaki KVC925 drive shaft transmits engine torque into the cylinder block to turn the main pump's rotary group, fitted on ~20-tonne excavators like the Kobelco SK200/SK210.

Việt Trung Hải supplies genuine and JIC shafts that seat in the original block at the correct clearance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-5
Condition
New, correct code
Availability
On request

What the KVC925 drive shaft fits

The drive shaft transmits torque from the engine into the cylinder block to spin the pump's rotary group. This shaft serves the Kawasaki KVC925 main pump, fitted on ~20-tonne excavators such as the Kobelco SK200/SK210 class. It splines into the rotary group and seals at the shaft seal, so concentricity and spline surface quality govern smooth running under load.

Signs of wear

Spline backlash, a rattle on throttle-up, vibration at the pump head, or oil weeping past the shaft seal all point to a worn KVC925 shaft. Replace it before the splines strip and damage the cylinder block and bearings.

Choosing quality

The shaft runs under continuous torque and rotating load, so its steel and spline heat treatment must meet the right hardness and fatigue strength. Việt Trung Hải is an authorized JIC Hydraulics distributor and ships the KVC925 JIC shaft machined to the code, its spline and journal tolerances seating it in the original block at the right clearance with no fitting work. We also keep genuine shafts on the shelf. Contact us for a fast quote.

Frequently asked questions

Which excavator does the KVC925 drive shaft fit?

The KVC925 is a Kawasaki main pump on ~20-tonne excavators, typically the Kobelco SK200/SK210 class. The drive shaft turns the pump's rotary group. Việt Trung Hải supplies the correct part with a fast quote.

How do I know the KVC925 shaft needs replacing?

Spline backlash, a rattle on throttle-up, vibration at the pump head, or oil weeping past the shaft seal all indicate a worn shaft. Replace it early to avoid damaging the cylinder block and bearings.

Does a JIC KVC925 shaft need fitting work in an existing block?

No. The JIC KVC925 is cut to the correct spline profile and journal tolerance, so it meshes in the original block and housing at the right working clearance. Việt Trung Hải is an authorized JIC Hydraulics distributor and also holds genuine shafts.

Get a quote

Request a quote: Drive shaft – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides