Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Rexroth A7VO25

Uchida/Rexroth · A7VO

Valve plate – Rexroth A7VO25

New, correct codeOn requestA7VO25

Quick answer

The Rexroth-Uchida A7VO25 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge on the small A7VO variable-displacement piston pump.

Việt Trung Hải stocks genuine and JIC A7VO25 plates on code that hold sealing under load, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Uchida/Rexroth · A7VO
Model code
A7VO25
Condition
New, correct code
Availability
On request

Which pump the A7VO25 valve plate fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Rexroth-Uchida A7VO25 variable-displacement piston pump — a small-displacement unit used in industrial and mobile hydraulic systems — it is a wear-critical part governing efficiency and internal sealing. Only the correct A7VO25 plate matches the block's port geometry.

When to replace

A worn or scored valve plate makes the A7VO25 lose pressure, run weak and heat the oil quickly. Look for scoring, pitting or erosion around the port kidneys and rising internal leakage where the pump whines but will not build pressure. Replace the plate and inspect the cylinder block and pistons.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải stocks the A7VO25 valve plate in genuine and JIC form. The JIC plate uses wear-resistant material with a flat, finely finished face cut to code, and it holds the interchange tolerances against the block, so sealing stays put under heavy load and nothing needs adjusting at fitting. Contact us for a fast quote.

Frequently asked questions

Which pump does the A7VO25 valve plate fit?

The A7VO25 valve plate fits the small Rexroth-Uchida A7VO variable-displacement piston pump used in industrial and mobile hydraulic systems. Order the exact A7VO25 code so the port geometry matches the cylinder block precisely.

How do I know the A7VO25 valve plate is worn?

Common signs are pressure loss, weak flow, sluggish operation and oil heating up. If the face shows scoring, pitting or erosion around the port kidneys, replace the plate and inspect the cylinder block and pistons.

Does Việt Trung Hải stock the A7VO25 valve plate?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor and keeps the A7VO25 plate in genuine and JIC form — same code, same fit in your pump. Contact us for advice and a fast quote based on your pump's condition.

Get a quote

Request a quote: Valve plate – Rexroth A7VO25

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides