
Valve plate – Rexroth A10V43
Quick answer
The Rexroth-Uchida A10V43 valve plate is the porting plate against the cylinder block that times each piston's intake and discharge in the A10V series main pump on small excavators.
Việt Trung Hải supplies genuine and JIC plates on code that swap straight into the original pump, fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10V43
- Condition
- New, correct code
- Availability
- On request
What the A10V43 valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The Rexroth-Uchida A10V43 valve plate fits the A10V series main axial-piston pump used on small and mini excavators. Its kidney ports and sealing face must stay flat and tight for the pump to hold flow and pressure.
Signs it needs replacing
Weak pump, slow pressure build-up, sluggish lifting or slewing, abnormally hot oil, and rising internal leakage as oil slips past the sealing face. Scoring, pitting or metal and bronze debris on the face confirm wear; a worn plate drops volumetric efficiency and can damage the block and pistons.
Choosing quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps A10V43 valve plates in genuine and JIC form: correct base material and bearing layer, ground flat, oil ports polished to code. The JIC plate is held to the interchange tolerances, so it swaps straight into the original pump with no boring or lapping. Contact us for the right part by pump number and a fast quote.
Frequently asked questions
Which pump and machine does the A10V43 valve plate fit?
The Rexroth-Uchida A10V43 valve plate fits the A10V series axial-piston main pump, common on small excavators and compact construction machines. Send your pump number or unit code so Việt Trung Hải can confirm the exact part before quoting.
How do I know the valve plate is worn?
Typical signs are slow pressure build-up, weak lifting or slewing, hot oil and rising internal leakage. If the sealing face shows scoring, pitting or bronze debris, replace it to avoid damaging the cylinder block and pistons.
How do I pick the right plate for my A10V43 pump?
Send the pump number stamped on the housing, plus a photo of the old plate if it is out — the A10V family has several port and rotation variants. Việt Trung Hải checks it and quotes the genuine code and the matching JIC code, each one cut to fit the original pump.
Get a quote
Request a quote: Valve plate – Rexroth A10V43
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V45A10V45On requestView · get a quoteTechnical handbook