Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A10V43

Uchida/Rexroth · A10V

Cylinder block – Rexroth A10V43

New, correct codeOn requestA10V43

Quick answer

The A10V43 cylinder block holds the piston bores of the Rexroth-Uchida A10V axial-piston pump, used on mini and compact excavators.

Việt Trung Hải supplies the correct-code A10V43 block, genuine or JIC Hydraulics, ready to run in the original pump housing, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10V43
Condition
New, correct code
Availability
On request

Rexroth-Uchida A10V43 cylinder block — what it fits

The cylinder block holds the piston bores that rotate around the drive shaft; the pistons reciprocate to move oil. It is the most heavily loaded part in the pump. The A10V43 belongs to the Rexroth-Uchida A10V axial-piston family, used as the main pump on mini and compact excavators. The block runs against the valve plate, so face flatness and finish drive efficiency.

Signs of wear

Scored bores or a worn block face increase clearance and internal leakage. The machine gets weak, lifts slowly and loses power under heavy digging; oil heats quickly and metal particles may appear. Unusual pump noise means the block needs inspection.

Choosing quality parts

Good material, heat treatment and precise bore machining keep clearances tight for the long run. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A10V43 block is cut to the same code and bore tolerance, so it drops onto the original valve plate with no lapping. Genuine blocks are on the shelf as well, with fast quotes.

Frequently asked questions

Which machines use the A10V43 cylinder block?

The A10V43 is part of the Rexroth-Uchida A10V piston-pump family, typically the main pump on mini and compact excavators. Send us your pump code and machine model so Việt Trung Hải can confirm the exact block for your assembly.

How do I know the cylinder block is worn?

Worn or scored piston bores and block face raise internal leakage: the machine feels weak, lifts slowly, loses power and the oil heats quickly, sometimes with metal particles. Inspect the block together with the pistons and valve plate.

Does a JIC A10V43 block need lapping to fit an old pump housing?

No. The JIC Hydraulics A10V43 is machined to the same code and bore tolerance, and its face seats on the original valve plate as it comes. Việt Trung Hải also stocks genuine blocks — send your pump code and we will check stock and quote fast.

Get a quote

Request a quote: Cylinder block – Rexroth A10V43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides