Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Rexroth-Uchida A7VO25

Uchida/Rexroth · A7VO

Pin – Rexroth-Uchida A7VO25

New, correct codeOn requestA7VO25

Quick answer

The A7VO25 rotary group is the rotating core — cylinder block, pistons, valve plate and shaft — that generates flow and pressure inside Rexroth (Uchida) A7VO bent-axis pumps used in industrial and mobile hydraulic systems.

Việt Trung Hải supplies genuine units and JIC sets to the correct code, seating in the original housing, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A7VO
Model code
A7VO25
Condition
New, correct code
Availability
On request

A7VO25 rotary group — what it fits

The rotary group — the pump's rotating core of cylinder block, pistons, valve plate and drive shaft — generates the pump's flow and pressure.

The A7VO25 is a small size in Rexroth's A7VO bent-axis variable-displacement pump family, built by Uchida to the Rexroth design. It suits industrial and mobile hydraulic systems and smaller equipment rather than large-excavator main pumps.

When to replace it

A weak pump, pressure drop, sluggish machine, knocking noise, or unusual oil heating from internal leakage point to a worn rotary group. On teardown you may find a scored valve plate, worn cylinder block or piston shoes, and metal debris in the oil.

Genuine-quality parts

A rotary group needs good material and precise machining to hold tight running clearances. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the A7VO25 group in genuine form and as JIC's own set — same code, same material, seating in the original Uchida housing at the right clearance with nothing to adjust. Send your pump code and machine details for advice and a fast quote.

Frequently asked questions

What does the A7VO25 rotary group fit?

The A7VO25 is a small size in Rexroth's (Uchida) A7VO bent-axis pump family, typically used in industrial and mobile hydraulic systems rather than large excavator main pumps. Send the full pump code and Việt Trung Hải will confirm the exact type.

When should I replace the whole rotary group?

When the pump loses pressure, the machine runs weak or slow, you hear knocking, or a teardown shows a scored valve plate, worn block and pistons, or metal in the oil. Replacing the complete rotary group is more reliable than repairing single parts.

Will a JIC A7VO25 rotary group fit an older Uchida pump?

Yes, as long as the code and suffix match. Older Uchida A7VO25 housings share the same fitting tolerance, so the JIC set goes straight in with no reaming or shimming. Việt Trung Hải is JIC Hydraulics' authorized distributor and also stocks genuine units.

Get a quote

Request a quote: Pin – Rexroth-Uchida A7VO25

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides