Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Rexroth-Uchida A7VO250

Uchida/Rexroth · A7VO

Washer – Rexroth-Uchida A7VO250

New, correct codeOn requestA7VO250

Quick answer

The Rexroth-Uchida A7VO250 washer is a shim-and-clearance part in the rotary group of the large A7VO bent-axis piston pump, used in high-power hydraulic systems on heavy construction and industrial equipment.

Việt Trung Hải stocks genuine and JIC parts made to code and to interchange tolerance for the original housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A7VO
Model code
A7VO250
Condition
New, correct code
Availability
On request

Rexroth-Uchida A7VO250 spacer washer

The spacer washer is a shim-and-clearance part of the rotary group — the rotating assembly inside a piston pump (cylinder block, pistons, valve plate, swash/flange and drive shaft) that generates flow and pressure. In the A7VO250 it holds the rotating parts in position and sets the running clearance that keeps the pump sealed. A7VO is Rexroth-Uchida's large bent-axis axial-piston pump series, used in high-power hydraulic systems on heavy construction and industrial equipment.

When to replace

A worn, scored or thinned washer throws off clearance and end-play: rising internal leakage, weak or slow pressure build-up, oil overheating, knocking or vibration under load. Replace it as a set during a rotary-group overhaul.

Genuine-quality parts

Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps A7VO250 washers from genuine and from JIC on the shelf — the JIC part is machined to code and to interchange tolerance, so it runs at the right clearance in the original A7VO housing under full working pressure. Contact us for a fast quote.

Frequently asked questions

Which pump and machine does the A7VO250 washer fit?

It belongs to the rotary group of the Rexroth-Uchida A7VO250, a large bent-axis piston pump. The A7VO series serves high-power hydraulic systems on heavy construction and industrial equipment. Send your pump code so we match the exact part.

How do I know the rotary-group washer is worn?

When it wears, scores or deforms, the clearance in the rotary group shifts: weak or slow pressure build-up, rising internal leakage, oil overheating and knocking or vibration under load. Inspect it and replace as a set during overhaul.

Do you stock the A7VO250 washer for each pump build?

Yes. We hold A7VO250 washers for the common A7VO builds, genuine as well as JIC Hydraulics, which Việt Trung Hải distributes under authorization. The JIC washer is made to code and interchange tolerance, so it goes into the original housing ready to run — send your pump number for a fast quote.

Get a quote

Request a quote: Washer – Rexroth-Uchida A7VO250

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides