Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki KVC932

Kawasaki · KVC

Valve plate – Kawasaki KVC932

New, correct codeOn requestKVC932

Quick answer

The Kawasaki KVC932 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in the Kawasaki KVC-series axial-piston unit on hydraulic excavators.

Việt Trung Hải supplies genuine and JIC plates to the KVC932 code, straight into the standard group, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · KVC
Model code
KVC932
SKU
2021-590-1-144
Condition
New, correct code
Availability
On request

What the KVC932 valve plate fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The Kawasaki KVC932 valve plate suits the Kawasaki KVC-series axial-piston unit used on hydraulic excavators, with port and kidney-slot geometry matched to that pump/motor.

When to replace

Look for a scored, pitted or grooved wear face with patchy metal shine, a weak pump, pressure drop and sluggish work under load, plus unusual oil heat. As the plate-to-block gap opens, high-pressure oil leaks back to low pressure and the pump loses flow.

Choosing quality parts

Flatness, material and the anti-wear surface finish decide service life. Việt Trung Hải carries the Kawasaki KVC932 valve plate both as a genuine part and as a JIC Hydraulics part supplied through our authorized distribution — same code, same tolerance, so the block seats evenly on it. Send your pump or motor code for a fast quote.

Frequently asked questions

Which pump or motor does the Kawasaki KVC932 valve plate fit?

The KVC932 valve plate suits the Kawasaki KVC-series axial-piston unit used on hydraulic excavators, with port and kidney-slot layout matched to that family. Send your pump or motor code and machine model so we can confirm the exact part before quoting.

How do I know the valve plate is worn and needs replacing?

A scored, pitted or grooved wear face with patchy metal shine is a clear sign. Combined with pressure drop, sluggish work under heavy load and unusual oil heat, replace the valve plate together with the cylinder block for a lasting repair.

Do I have to change the cylinder block when I change the KVC932 plate?

It depends on the block face. If it is still flat, the plate alone is enough; a deeply scored or pitted block will chew up a fresh plate quickly. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries the KVC932 plate to code plus the rest of the group, so the whole assembly goes back together matched.

Get a quote

Request a quote: Valve plate – Kawasaki KVC932

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides