Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki KVC932

Kawasaki · KVC

Cylinder block – Kawasaki KVC932

New, correct codeOn requestKVC932

Quick answer

The Kawasaki KVC932 cylinder block holds the piston bores that rotate around the drive shaft, setting the flow and pressure of KVC-series main pumps on medium-to-large excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps genuine and JIC KVC932 blocks that fit the original housing directly, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · KVC
Model code
KVC932
SKU
2021-590-1-252
Condition
New, correct code
Availability
On request

Kawasaki KVC932 cylinder block — where it fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil — it sets the pump's flow and pressure. KVC932 is the block for Kawasaki KVC-series main pumps on medium-to-large excavators. It carries high load and slides continuously against the valve plate, so machining accuracy drives pump strength and service life.

Signs it needs replacing

A weak pump and slow, gutless lifting from worn piston bores and internal leakage; a scored or pitted valve-plate face; unusual heat, noise or vibration under pressure; metal debris in the hydraulic oil. Replace the block together with the pistons and valve plate to restore sealing.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC machines the KVC932 block to the same code, with piston bores and valve-plate face held to fitting tolerance, so it drops into the original pump housing with no reboring or lapping. Our shelves carry both genuine and JIC blocks for the KVC series. Call us to confirm the part and get a quote.

Frequently asked questions

Which pump does the KVC932 cylinder block fit?

KVC932 is the cylinder block for Kawasaki KVC-series main pumps used on medium-to-large excavators. Send us your pump code or machine model and Việt Trung Hải will confirm the exact part before quoting.

When should the cylinder block be replaced?

When the pump goes weak, lifting is slow, the pump runs hot, knocks or vibrates, or metal debris shows in the oil — usually worn bores and a scored valve-plate face. Replace the block with pistons and valve plate for proper sealing.

Does a JIC block need machining to fit the original KVC932 pump?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC KVC932 block is made to the same code, with bores and valve-plate face held to fitting tolerance, so it goes straight into the original housing at the correct working clearance. Genuine blocks are on the shelf too.

Get a quote

Request a quote: Cylinder block – Kawasaki KVC932

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides