Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Rexroth A8V55

Uchida/Rexroth · A8VO

Valve plate – Rexroth A8V55

New, correct codeOn requestA8V55

Quick answer

The A8V55 valve plate is the high/low-pressure porting plate in the Rexroth-Uchida A8VO main pump, timing each piston's intake and discharge; the A8VO55 fits ~13-tonne excavators.

Việt Trung Hải supplies JIC A8V55 plates on code and on interchange tolerance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V55
Condition
New, correct code
Availability
On request

The A8V55 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge inside the pump. Its two kidney ports carry the full pressure differential and the block's sliding load, so surface flatness and hardness set both pump efficiency and service life.

Which pump it fits

This valve plate belongs to the Rexroth-Uchida A8VO main-pump series — specifically the A8VO55 bent-axis piston pump used on ~13-tonne excavators. It must match the pump variant; a wrong kidney-port profile or reversed orientation mistimes intake and discharge and damages the block.

Signs of wear

Scoring, pitting, or a worn ridge around the kidney ports; a weak, slow pump that loses pressure under load; more internal leakage and metal debris in the oil.

Choosing quality

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC A8V55 plate is made from correct-grade material, heat-treated and lapped flat to a fine finish, sized and toleranced to interchange with the A8VO55 pump, so it swaps straight into the original unit. We ship the correct code with fast quotes.

Frequently asked questions

Which pump and machine does the A8V55 valve plate fit?

The A8V55 valve plate belongs to the Rexroth-Uchida A8VO main-pump series, the A8VO55 bent-axis piston pump typically fitted on excavators around 13 tonnes. Choose the code matching your pump variant so the kidney-port profile and orientation line up.

How do I know the valve plate needs replacing?

Scoring, pitting, or a worn ridge around the kidney ports is a clear sign. Combined with a weak, slow pump that loses pressure under load and metal debris in the oil, replace the valve plate and inspect the cylinder block.

Does Việt Trung Hải stock the A8V55 valve plate?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor holding correct-code JIC A8V55 plates for the A8VO55 pump — they go straight into the original unit with no rework. Send your pump code or a photo of the part and we will quote fast.

Get a quote

Request a quote: Valve plate – Rexroth A8V55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides