
Drive shaft – Rexroth A8V55
Quick answer
The A8V55 drive shaft transmits engine torque into the cylinder block of the Rexroth-Uchida A8VO main pump, used on ~13-tonne excavators.
Việt Trung Hải supplies the A8V55 in genuine and JIC form, cut to code so it seats in the original block at the right clearance, with a fast quote once you send your pump code and spline tooth count.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V55
- Condition
- New, correct code
- Availability
- On request
What the A8V55 drive shaft fits
The drive shaft transmits torque from the engine into the cylinder block to rotate the pump's rotary group. This shaft serves the Rexroth-Uchida A8V55 main piston pump, part of the A8VO family fitted to excavators in the ~13-tonne class. Its splines engage the input coupling and the cylinder block, so accurate tooth geometry is what lets it seat properly and drive smoothly. When ordering, confirm the spline tooth count and whether you need the front (engine-driven) or rear (tandem) shaft.
When to replace
Worn or loose splines, a rattle under throttle, a scored seal journal that leaks, or a bent shaft causing vibration and overheating all mean the shaft is finished.
Choosing quality
Việt Trung Hải supplies the A8V55 drive shaft in genuine and JIC form: properly hardened steel, precise spline machining and journals to tolerance, so it seats in the original block at the clearance the pump was built with. As an authorized JIC Hydraulics distributor we ship the exact code — send your pump code and tooth count for a fast quote.
Frequently asked questions
Which excavator does the A8V55 drive shaft fit?
It is the drive shaft for the Rexroth-Uchida A8V55 main pump in the A8VO family, typically used on ~13-tonne excavators. Send your pump code and spline tooth count so we confirm the exact part before quoting.
How do I choose the front or rear shaft?
The front shaft is driven directly by the engine; the rear links to the second pump in a tandem unit. The key differences are spline tooth count and mounting position, so confirm both when you order to avoid a mismatch.
What is the difference between the front and rear shaft on a twin A8V55?
The front shaft takes drive from the engine; the rear one carries drive to the second pump section, and they differ in splines and length. Tell us the position and tooth count and Việt Trung Hải ships the right A8V55 — genuine and JIC are cut to the same code.
Get a quote
Request a quote: Drive shaft – Rexroth A8V55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook