
Cylinder block – Rexroth A8V55
Quick answer
The A8V55 cylinder block is the piston-bore barrel inside the Rexroth-Uchida A8VO-series piston pump — the A8VO55 main pump on ~13-ton excavators.
Việt Trung Hải supplies genuine and JIC blocks on the correct code, taking the original pistons, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V55
- Condition
- New, correct code
- Availability
- On request
What the A8V55 cylinder block fits
The cylinder block is the steel barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside to draw and discharge hydraulic oil. The A8V55 belongs to the Rexroth-Uchida A8VO piston-pump series — specifically the A8VO55 main pump used on roughly 13-ton excavators. Bore accuracy and the condition of the valve-plate face decide how well the pump delivers flow.
Signs it needs replacing
Scoring or pitting on the valve-plate face, oval-worn bores, internal leakage, weak pump output, slow machine movement, hot oil, or metal particles in the oil all point to a worn block. Replace the block together with the piston set.
Choosing quality parts
Việt Trung Hải supplies genuine Rexroth A8V55 blocks and JIC Hydraulics blocks — correct code, precise machining, and bores that take the original pistons straight into the A8VO55 rotating group. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A8V55 block fit?
The A8V55 is the cylinder block inside the Rexroth-Uchida A8VO-series piston pump, specifically the A8VO55 main pump on roughly 13-ton excavators. Send your pump code to Việt Trung Hải to confirm the exact part and get a fast quote.
When should the cylinder block be replaced?
Replace it when the pump goes weak, loses pressure, runs slow or overheats, and the valve-plate face shows scoring, pitting or grooving. Metal particles in the oil signal a worn block and pistons — replace them as a set.
Are JIC A8V55 bores machined to the right tolerance?
They are. JIC Hydraulics cuts the A8V55 to code, with piston bores and valve-plate face on the fitting tolerances, so the original pistons drop in and the pump holds pressure. Việt Trung Hải also carries genuine Rexroth blocks, with code advice and fast quotes.
Get a quote
Request a quote: Cylinder block – Rexroth A8V55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook