
Piston ring – Rexroth-Uchida A8V55
Quick answer
The A8V55 piston ring is the sealing ring on the pistons of the Rexroth (Uchida) A8VO55 main pump, used on ~13-tonne excavators; it holds pressure and blocks internal leakage to keep pump efficiency.
Việt Trung Hải supplies JIC parts on code that seal in the bore as fitted, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V55
- Condition
- New, correct code
- Availability
- On request
What the A8V55 piston ring fits
The piston ring is the sealing ring on each pump piston. It closes the gap between the piston and its cylinder bore inside the rotary group, holding pressure and blocking internal leakage so the pump keeps its volumetric efficiency. This set fits the Rexroth (Uchida) A8VO main pump, size A8VO55 — an axial piston pump typically found on ~13-tonne excavators. Each piston carries its own ring, so replace the full set together.
When to replace
Worn or scored rings let oil bypass the piston: weak pump, slow boom and swing under load, oil heating fast, higher fuel burn and pressure that will not hold. If rings look flattened or the bores are scored, replace the piston set as a unit rather than opening the pump twice.
Choosing quality parts
The A8V55 piston rings sold here are JIC Hydraulics parts, distributed by Việt Trung Hải under authorization — correct code, wear-resistant material, machined to the right tolerance for a tight bore fit and a lasting seal, with no filing of the end gap. Pistons, valve plate and rotary-group parts are stocked to match. Send your pump code for a fast quote.
Frequently asked questions
Which pump and machine does the A8V55 piston ring fit?
The A8V55 ring set fits the Rexroth (Uchida) A8VO main pump, size A8VO55 — an axial piston pump usually mounted on roughly 13-tonne excavators. Send your pump code and machine model so we can confirm the exact set.
When should the piston rings be replaced?
When the pump feels weak, boom or swing slows under load, oil heats fast and pressure will not hold — usually worn rings letting oil bypass the piston. If rings look flattened or bores are scored, replace the whole piston set.
Do A8V55 rings need the end gap filed or the face lapped?
No. JIC rings are made to the A8V55 code with thickness and end gap already at fitting tolerance, so they seal in the piston groove and bore as they come — just clean the groove, check it for a wear step and assemble. Việt Trung Hải confirms the pump code before shipping.
Get a quote
Request a quote: Piston ring – Rexroth-Uchida A8V55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook