Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki MX750

Kawasaki · MX

Valve plate – Kawasaki MX750

New, correct codeOn requestMX750

Quick answer

The Kawasaki MX750 valve plate is the high/low-pressure porting plate that times each piston's intake and discharge inside Kawasaki's MX-series travel motor, used on large crawler excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct MX750 valve plate with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · MX
Model code
MX750
SKU
2021-590-1-150
Condition
New, correct code
Availability
On request

What the Kawasaki MX750 valve plate fits

The Kawasaki MX750 valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. It sits inside Kawasaki's MX-series travel (final drive) motor, a drive unit used on large crawler excavators. The face must stay flat and sealed — one scratch lets oil slip across the gap and the motor loses power.

Signs it needs replacing

A worn or pitted valve plate shows up as a weak travel motor: the machine tracks to one side, loses drive on slopes, and heats up fast. Expect whining, vibration and metal particles in the oil; the contact face often looks scored.

Genuine quality — quote from VTH

Valve plates need wear-resistant material, a high-flatness finish and correct heat treatment to hold the seal. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the MX750 from JIC to code and to size, so a fitter puts it straight into a standard travel motor and it runs. Genuine Kawasaki plates are stocked as well. Send your motor code for a fast quote.

Frequently asked questions

Which machine does the Kawasaki MX750 valve plate fit?

The MX750 valve plate sits inside Kawasaki's MX-series travel (final drive) motor, typically fitted to large crawler excavators. Send your motor code or machine model and Việt Trung Hải will confirm the exact part before quoting.

How do I know the valve plate is worn?

A weak motor, tracking to one side or losing drive on slopes, fast oil heating and metal particles are typical signs. On teardown the contact face usually looks scored or pitted. Replace it to protect the cylinder block.

What else should be changed with the MX750 valve plate?

With the MX750 motor open, check the block face, the piston heads and the shaft seal — a fresh plate laid on a pitted block wears out again fast. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries the MX750 plate plus the rest of the group, so it all goes back in one pass.

Get a quote

Request a quote: Valve plate – Kawasaki MX750

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides