
Valve plate – Rexroth A8V107
Quick answer
The Rexroth-Uchida A8V107 valve plate is the high/low-pressure porting plate for the A8VO main pump family; the A8VO107 size powers around 20-ton excavators.
Việt Trung Hải supplies the JIC plate on code, a straight fit in the original pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V107
- Condition
- New, correct code
- Availability
- On request
Rexroth-Uchida A8V107 valve plate — pump fit
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. The A8V107 fits the Rexroth (Uchida) A8VO main pump family — the A8VO107 size powers roughly 20-ton excavators. Its sealing face runs under high pressure and constant sliding, so flatness and finish are critical.
When to replace
Scoring, pitting or uneven wear lets oil leak internally, so the machine grows weak and sluggish, worse when hot. Grey heat discolouration on the sealing face is another clear sign.
Genuine-quality choice
A correct valve plate needs hard material and a lapped, true face to seal against the block. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC A8V107 plate — the right Rexroth-Uchida code, the right interchange tolerances, and a straight fit in the original pump. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A8V107 valve plate fit?
It is the valve plate for the Rexroth-Uchida A8VO main pump family; the A8VO107 size typically fits excavators around the 20-ton class. Việt Trung Hải supplies the correct code and advises based on your machine and pump number.
How do I know the valve plate is worn out?
When the face is scored, pitted or worn, the pump leaks internally, so the machine turns weak, slow and runs hot, worse as it heats up. Grey heat discolouration is another sign. Inspect the cylinder block at the same time.
Does the JIC A8V107 plate need any machining before it goes in?
No. The JIC plate is cut to the A8V107 code and its interchange tolerances, with the face already lapped flat and polished, so it seals on the original block. Việt Trung Hải distributes JIC Hydraulics and ships the right code against your pump number.
Get a quote
Request a quote: Valve plate – Rexroth A8V107
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO107A8VO107On requestView · get a quoteTechnical handbook