
Cylinder block – Rexroth A8V107
Quick answer
The Rexroth/Uchida A8V107 cylinder block holds the piston bores in the A8VO main pump (size A8VO107), used on roughly 20-tonne excavators.
Việt Trung Hải supplies genuine and JIC blocks on the correct code, ready to fit the existing pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V107
- Condition
- New, correct code
- Availability
- On request
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside to draw and push oil. It carries the heaviest load and friction in the pump.
What the A8V107 block fits
The A8V107 belongs to the Rexroth/Uchida A8VO main-pump family, size A8VO107 — an axial-piston pump typically found on roughly 20-tonne excavators. The block runs against the valve plate, so the fit must match the exact code, bore count and valve-plate orientation.
When to replace
Weak, slow lifting under load, oil heating up quickly, internal leakage, and scoring or pitting on the block face or piston bores all point to a worn block. Replace it early to protect the pistons and the valve plate.
Choosing quality
Việt Trung Hải is an authorized JIC Hydraulics distributor supplying A8V107 blocks in genuine and JIC, all on the correct code. Hardened material and bores machined to tolerance keep the original pump assembly sealed and running smoothly. Contact VTH for a fast quote.
Frequently asked questions
Which pump and machine does the A8V107 block fit?
The A8V107 cylinder block belongs to the Rexroth/Uchida A8VO main-pump family, size A8VO107, typically fitted on roughly 20-tonne excavators. Match the exact code and valve-plate orientation so the pump seals and holds pressure.
When should the cylinder block be replaced?
Change it once the machine loses power, lifts slowly, heats the oil fast or leaks internally, and the block face or piston bores show scoring or pitting. Acting early keeps the pistons and the valve plate out of trouble.
Will a JIC A8V107 block seat on the old valve plate?
It will. JIC machines the A8V107 to code, with the right bore count and face tolerance, so it seals against the original valve plate. Việt Trung Hải is an authorized JIC Hydraulics distributor and also stocks genuine blocks, with fast quotes.
Get a quote
Request a quote: Cylinder block – Rexroth A8V107
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO107A8VO107On requestView · get a quoteTechnical handbook