Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Rexroth A8V86

Uchida/Rexroth · A8VO

Rotary group kit – Rexroth A8V86

New, correct codeOn requestA8V86

Quick answer

The Rexroth-Uchida A8V86 rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates flow and pressure for the A8VO-series main pump on mid-size excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC parts correct to code, with the right material and surface hardness, and a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V86
Condition
New, correct code
Availability
On request

Rexroth-Uchida A8V86 rotary group — which pump it fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. This kit fits the Rexroth/Uchida A8VO-series main pump used on mid-size crawler excavators; within the family, smaller codes sit on lighter machines while A8V86 falls in the mid-size bracket. Fitting a fresh rotary group restores pump output without replacing the whole pump.

Signs it needs replacing

Worn rotary parts show up as slow, weak movements, loss of power under load, an overheating or noisy pump, and pressure that drops while holding a load — usually a scored valve plate and swash face plus loose pistons in the block.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies A8V86 rotary groups in genuine and JIC form, each correct to code. The JIC set puts its attention on material and the hardness of the shoe face — the surface that takes the most wear — so the contact stays sealed and the pump keeps its pressure. Contact us for a fast quote.

Frequently asked questions

Which excavator does the A8V86 rotary group fit?

The A8V86 belongs to the Rexroth/Uchida A8VO main-pump family used on mid-size crawler excavators. Send us your machine model and the code on the pump housing and we will confirm the correct rotary group and quote.

Replace the whole rotary group or single parts?

It depends on wear. If the block, pistons, valve plate and swash face are all scored, fit the complete rotary group so the pump holds pressure reliably. We stock both full kits and individual A8V86 parts to code.

How much scoring on the shoe face means the A8V86 group has to go?

Light marks can still be lapped, but once the grooves run deep, the piston shoes have lost their bronze or the block bores have opened up, lapping will not bring the clearance back. That is when a complete A8V86 set to the code is the sound call. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries JIC and genuine parts and quotes fast from your photos.

Get a quote

Request a quote: Rotary group kit – Rexroth A8V86

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides