Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Rexroth A8V86

Uchida/Rexroth · A8VO

Drive shaft – Rexroth A8V86

New, correct codeOn requestA8V86

Quick answer

The Rexroth-Uchida A8V86 drive shaft transmits torque from the engine into the cylinder block of the A8VO/A8V main pump, used on mid-size excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks the A8V86 shaft in genuine and JIC — machined to code and fitting the original pump directly, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V86
Condition
New, correct code
Availability
On request

Rexroth-Uchida A8V86 drive shaft: which pump it fits

The drive shaft transmits torque from the engine into the cylinder block to spin the pump's rotary group. It fits the A8VO/A8V main pump family (Uchida A8V86, equivalent to Rexroth A8VO86), an axial-piston pump on mid-size excavators. Within this family the A8VO55 runs ~13t machines and the A8VO107 runs ~20t machines, so the A8V86 sits between them.

When to replace

Watch for spline backlash and rounded teeth (noise, vibration, lost drive), a scored seal journal causing oil leakage at the pump head, or a bent or cracked shaft that drops pressure and weakens lifting.

Choosing quality

Shaft material, heat treatment and spline accuracy set its life. Việt Trung Hải is an authorized JIC Hydraulics distributor: the A8V86 shaft comes on JIC's own code, with the spline profile and journal tolerances cut to spec, so it meshes with the original cylinder block straight away. Genuine shafts are on the shelf as well. Contact us for a fast quote.

Frequently asked questions

Which excavator size does the A8V86 drive shaft fit?

It is the input drive shaft of the A8VO/A8V main pump (Uchida A8V86, equivalent to Rexroth A8VO86) used on mid-size excavators. The A8VO55 runs ~13t machines and the A8VO107 ~20t, so the A8V86 sits between them.

How do I know the drive shaft needs replacing?

Signs include spline backlash or rounded teeth causing noise, vibration and lost drive; a scored journal leaking oil at the pump head; or a bent or cracked shaft dropping pressure and weakening lifting. Inspect and replace to the correct code.

Does Việt Trung Hải stock the A8V86 drive shaft?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải stocks the A8V86 shaft in genuine and JIC, both machined to the same code and spline tolerance, so either one fits the original pump as it is. Contact us for a fast quote.

Get a quote

Request a quote: Drive shaft – Rexroth A8V86

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides