
Valve plate – Rexroth A8V86
Quick answer
The A8V86 valve plate is the high/low-pressure porting plate inside Rexroth-Uchida A8VO-series piston pumps, timing each piston's intake and discharge on mid-size excavators.
Việt Trung Hải supplies the JIC A8V86 plate on code and on interchange tolerance, with a fast quote from your pump code.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V86
- Condition
- New, correct code
- Availability
- On request
The valve plate is the porting plate pressed against the cylinder block; it times each piston's intake and discharge inside the pump. On the Rexroth-Uchida A8V86 (A8VO series) piston pump, it carries the full pressure difference between suction and delivery on every revolution.
Which pump the A8V86 fits
The A8V86 belongs to the Rexroth-Uchida A8VO main-pump family fitted on mid-size excavators. It wears as a matched pair with the cylinder block, so inspect the block face when you replace it. Việt Trung Hải supplies the correct A8V86 valve plate with the right port profile and fitting direction.
When to replace
Scoring, pitting or bluish heat discolouration on the wear face are the clearest signs. A worn or warped plate lets high-pressure oil bleed across to the low-pressure side — weak, slow pump, load drop on lift and fast-heating oil.
Choosing quality
A good valve plate needs wear-resistant material, a hardened face and flat, polished machining to seal. Việt Trung Hải is an authorized JIC Hydraulics distributor — the JIC A8V86 plate is made to the correct code and interchange tolerances, so it is right in the original pump with no lapping or fitting work. Việt Trung Hải sells genuine plates for the A8VO family as well. Send your pump code for a fast quote.
Frequently asked questions
Which pump does the A8V86 valve plate fit?
The A8V86 belongs to the Rexroth-Uchida A8VO main-pump family used on mid-size excavators. When ordering, send the full pump code and a photo of the port profile so Việt Trung Hải can confirm the correct plate and fitting direction.
How do I know the valve plate has failed?
With the pump open, scoring, pitting or bluish heat discolouration on the wear face means it is worn. You will usually also feel a weak, slow pump, load drop on lift and fast-heating oil as high-pressure oil bleeds across to the low-pressure side.
Should I replace only the valve plate or the whole set?
The valve plate wears as a pair with the cylinder block, so check the block face too. If the block is still flat and sealing, a new A8V86 plate alone is enough; if the block is deeply scored, refinish or replace both together.
Get a quote
Request a quote: Valve plate – Rexroth A8V86
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook