
Cylinder block – Rexroth A8V86
Quick answer
The Rexroth-Uchida A8V86 cylinder block holds the piston bores of the A8VO series main pump, fitted on medium excavators (between the A8VO55 ~13t and A8VO107 ~20t classes).
Việt Trung Hải supplies genuine and JIC blocks on the correct code, sealing against the valve plate, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V86
- Condition
- New, correct code
- Availability
- On request
What the A8V86 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. The A8V86 block belongs to the Rexroth-Uchida A8VO axial-piston main-pump family used on medium excavators — sitting between the A8VO55 class (~13t machines) and the A8VO107 class (~20t machines). Its running face seals against the valve plate, and that seal governs the pressure and flow the pump can build.
Signs it needs replacing
A worn block shows up as a weak, slow pump, fast oil heating and pressure drop under load. Scored or pitted faces and bell-mouthed bores cause internal leakage and clear loss of lifting power.
Choosing quality
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies A8V86 blocks in genuine and JIC — hardened material, a flat lapped face, bore tolerances on code, so the block seals on the original valve plate and the pump comes back to pressure. Contact us for a fast quote and model-based advice.
Frequently asked questions
Which pump and machine does the A8V86 block fit?
The A8V86 is a cylinder block for the Rexroth-Uchida A8VO series main pump on medium excavators. In this family the A8VO55 runs ~13t machines and the A8VO107 ~20t, with the A8V86 between them. Share your pump and machine model to confirm.
How do I know the cylinder block is worn?
Common signs are a weak, slow pump, fast oil heating and pressure drop under load. If the running face is scored or pitted, or the piston bores are bell-mouthed, replace the block to avoid damaging a new valve plate.
How do I match an A8V86 block to my machine?
Send the pump code, the machine serial and photos of the old block; Việt Trung Hải places it within the A8VO size range and confirms the code. As an authorized JIC Hydraulics distributor we hold A8V86 blocks in genuine and JIC, all on code, quoted fast.
Get a quote
Request a quote: Cylinder block – Rexroth A8V86
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook