
Piston – Rexroth-Uchida A8V86
Quick answer
The A8V86 piston set is the reciprocating pistons in the rotary group of a Rexroth-Uchida A8VO main pump used on mid-size excavators.
Việt Trung Hải supplies JIC pistons matched to the A8V86 code that go straight into the original cylinder block, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V86
- Condition
- New, correct code
- Availability
- On request
What the A8V86 piston fits
Pistons are the reciprocating elements inside the rotary group of an axial piston pump. Each piston shoe rides on the swash plate, drawing and then pressurizing oil every revolution to build the pump's flow and pressure. The A8V86 belongs to the Rexroth-Uchida A8VO series — a variable main pump for mid-size excavators, sitting between the A8VO55 (~13t) and A8VO107 (~20t) classes.
Signs of wear
A weak pump, slow boom lift and swing at full throttle point to worn pistons. Look for scored piston bodies, loose or lifted shoes, and widening bore clearance that raises internal leakage, along with fast oil heating and metal particles.
Choosing quality
Change the pistons as a set and match the A8V86 code. The A8V86 pistons here are made by JIC Hydraulics and come through Việt Trung Hải as its authorized distributor — correct code, proper material and surface finish, machined to go straight into the original cylinder block. Genuine parts are stocked as well. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A8V86 piston fit?
The A8V86 piston belongs to the Rexroth-Uchida A8VO main pump, fitted to mid-size excavators between the A8VO55 and A8VO107 classes. Send your pump code and machine model and Việt Trung Hải will confirm the exact piston set before quoting.
When should the whole piston set be replaced?
When the pump is weak, slow, the oil overheats and shows metal particles, the piston bodies or shoes are usually worn. Replace the full piston set together with the cylinder block and swash plate so the pump recovers flow and avoids quick re-wear.
Does the pump need re-setting after fitting A8V86 pistons?
Nothing special. JIC pistons are made to the A8V86 code and tolerance, so once the group is together the pump comes back to its proper flow and pressure. Bleed the air, run it unloaded, then check the cut-off pressure by the procedure for your pump version.
Get a quote
Request a quote: Piston – Rexroth-Uchida A8V86
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook