Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Rexroth A8V107

Uchida/Rexroth · A8VO

Drive shaft – Rexroth A8V107

New, correct codeOn requestA8V107

Quick answer

The A8V107 drive shaft transmits engine torque into the cylinder block of the Rexroth-Uchida A8VO107 main pump, used on roughly 20-ton excavators.

Việt Trung Hải supplies the A8V107 in genuine and JIC form, cut to code and spline profile so it holds the original working clearance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V107
Condition
New, correct code
Availability
On request

What the A8V107 drive shaft fits

The drive shaft transmits torque from the engine into the cylinder block to rotate the pump's rotary group. This shaft serves the Rexroth-Uchida A8VO107 main pump (code A8V107), a hydraulic piston pump used on roughly 20-ton crawler excavators. It splines to the engine-side coupling and to the cylinder block, so concentricity and spline profile must be correct for smooth, full-flow operation.

Signs it needs replacing

Worn or loose splines, knocking or vibration under load, a twisted or fatigue-cracked shaft, and pitting or scoring at the seal journal all point to a failing shaft. Replace it together with the related seal and bearing to protect the rotary group.

Choosing quality parts

Shaft life depends on alloy steel, heat treatment, and spline machining accuracy. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the A8V107 shaft in genuine and JIC form — correct code, correct spline profile, journals to tolerance, so it holds the working clearance the pump had when new. Contact us for a fast quote.

Frequently asked questions

Which excavator does the A8V107 drive shaft fit?

The A8V107 shaft drives the Rexroth-Uchida A8VO107 main pump, a hydraulic piston pump found on roughly 20-ton crawler excavators. Send your pump and machine model so Việt Trung Hải can confirm the exact part before quoting.

How do I know the drive shaft needs changing?

Worn loose splines, knocking or vibration at the coupling, a twisted or cracked shaft, or a pitted seal journal all say it is time. Change it together with the related seal and bearing to protect the pump's rotary group.

Does a JIC A8V107 shaft need any work to fit an existing block?

No. The JIC A8V107 is cut to the code and spline profile, so it meshes with the original cylinder block and coupling and keeps the working clearance the pump had when new. Việt Trung Hải, an authorized JIC Hydraulics distributor, also carries genuine shafts and quotes fast.

Get a quote

Request a quote: Drive shaft – Rexroth A8V107

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides