
Valve plate – Rexroth A10VD17
Quick answer
The A10VD17 valve plate is the porting plate that times each piston's intake and discharge in the Rexroth/Uchida A10V main pump used on mini excavators.
Việt Trung Hải supplies genuine and JIC plates — same code, same fit in the original pump — with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VD17
- Condition
- New, correct code
- Availability
- On request
What the A10VD17 valve plate does
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the pump. Part A10VD17 belongs to the Rexroth/Uchida A10V main-pump family fitted on compact mini excavators. Running constantly under high pressure against the rotating block, its sealing face and flatness govern pump efficiency and service life.
Signs it needs replacing
A worn valve plate shows up as weak, slow operation and lost power under load. On the face you'll find deep scoring, wear grooves, or cavitation pitting around the kidney ports, plus heat discoloration and a peeling bronze layer — all signs of rising internal leakage. Replace early to protect the cylinder block and pistons.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies the A10VD17 valve plate in genuine and JIC form, each to the correct code. The JIC plate is controlled for material, machined flatness and surface durability, and its interchange tolerances match the original A10V pump, so it seals and runs quietly straight after fitting. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A10VD17 valve plate fit?
The A10VD17 is a valve plate for the Rexroth/Uchida A10V main pump, commonly used on compact mini excavators. Share your pump code and machine model so Việt Trung Hải can confirm the exact part before quoting.
When should the valve plate be replaced?
When the machine feels weak or slow, oil heats up fast, or the sealing face shows deep scoring, cavitation pitting, or a peeling bronze layer. Replace early to avoid damage spreading to the cylinder block and pistons.
Do you supply genuine parts?
Yes. Việt Trung Hải sells genuine parts and, as an authorized JIC Hydraulics distributor, the JIC A10VD17 plate as well — same code, same fit in the original pump. Contact us for technical advice and a fast quote.
Get a quote
Request a quote: Valve plate – Rexroth A10VD17
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quoteTechnical handbook